Hi Thinh,
On 9/4/2024 3:41 AM, Thinh Nguyen wrote:
On Tue, Sep 03, 2024, Akash Kumar wrote:
The current logic is rigid, setting num_fifos to fixed values:
3 for any maxburst greater than 1.
tx_fifo_resize_max_num for maxburst greater than 6.
Additionally, it did not differentiate much between bulk and
isochronous transfers, applying similar logic to both.
The new logic is more dynamic and tailored to the specific needs of
bulk and isochronous transfers:
Bulk Transfers: Ensures that num_fifos is optimized by considering
both the maxburst value and the maximum allowed number of FIFOs.
Isochronous Transfers: Ensures that num_fifos is sufficient by
considering the maxburst value and the maximum packet multiplier.
This change aims to optimize the allocation of Tx FIFOs for both bulk
and isochronous endpoints, potentially improving data transfer
efficiency and overall performance.
It also enhances support for all use cases, which can be tweaked
with DT parameters and the endpoint’s maxburst and maxpacket.
Signed-off-by: Akash Kumar <quic_akakum@xxxxxxxxxxx>
---
Changes for v2:
Redefine logic for resizing tx fifos.
Changes for v1:
Added additional condition to allocate tx fifo for hs isoc eps,
keeping the other resize logic same.
---
drivers/usb/dwc3/gadget.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89fc690fdf34..49809a931104 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -778,15 +778,12 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
- if ((dep->endpoint.maxburst > 1 &&
- usb_endpoint_xfer_bulk(dep->endpoint.desc)) ||
- usb_endpoint_xfer_isoc(dep->endpoint.desc))
- num_fifos = 3;
-
- if (dep->endpoint.maxburst > 6 &&
- (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
- usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31))
- num_fifos = dwc->tx_fifo_resize_max_num;
+ if (usb_endpoint_xfer_bulk(dep->endpoint.desc))
+ num_fifos = min_t(unsigned int, dep->endpoint.maxburst + 1,
+ dwc->tx_fifo_resize_max_num);
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ num_fifos = max_t(unsigned int, dep->endpoint.maxburst,
+ usb_endpoint_maxp_mult(dep->endpoint.desc));
No. Don't mix usb_endpoint_maxp_mult with maxburst like this. Check base
on operating speed. Also, now you're ignoring tx_fifo_resize_max_num for
isoc.
Sure will add separate check based on speed.
We have to support three versions of CAM support through same dt and image
SS/SS+ capable cam which needs 10k fifo
HS cams which needs 3K
multi UVC cams which needs 1k and 2k fifo
Putting any dependency with tx_fifo_resize_max_num, we can't achieve 1k
and 10K,
it has to be decided by maxbursts itself which user can configure.
All uvc gadget applications supports configurable maxburst which they
use while opening,
so it should be better for isoc eps to decide fifo based on maxbursts.
Thanks,
Akash
