Re: [PATCH v26 16/33] ASoC: doc: Add documentation for SOC USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> diff --git a/Documentation/sound/soc/index.rst b/Documentation/sound/soc/index.rst
> index e57df2dab2fd..8bed8f8f48da 100644
> --- a/Documentation/sound/soc/index.rst
> +++ b/Documentation/sound/soc/index.rst
> @@ -18,3 +18,4 @@ The documentation is spilt into the following sections:-
>     jack
>     dpcm
>     codec-to-codec
> +   usb
> diff --git a/Documentation/sound/soc/usb.rst b/Documentation/sound/soc/usb.rst
> new file mode 100644
> index 000000000000..bd3d9eb86b07
> --- /dev/null
> +++ b/Documentation/sound/soc/usb.rst
> @@ -0,0 +1,429 @@
> +================
> +ASoC USB support
> +================
> +
> +Overview
> +========
> +In order to leverage the existing USB sound device support in ALSA, the
> +ASoC USB APIs are introduced to allow for the entities to communicate
> +with one another.

nit-pick: entities is rather vague and an overloaded term in USB audio.
Maybe "allow the subsystems to exchange configuration information"

> +One potential use case would be to support USB audio offloading, which is
> +an implementation that allows for an external DSP on the SoC to handle the

nit-pick: not sure about the reference to an 'external DSP'. "external"
would usually to a stand-alone device and there's no real need for DSP
capabilities for USB offload, e.g. a regular embedded core would do just
fine.

maybe "allows for an alternate power-optimized path in the audio
subsystem to handle the transfer of audio data over the USB bus"

> +transfer of audio data over the USB bus.  This would let the main
> +processor to stay in lower power modes for longer duration.  The following
> +is an example design of how the ASoC and ALSA pieces can be connected
> +together to achieve this:

> +	int snd_soc_usb_update_offload_route(struct device *dev, int card, int pcm,
> +					     int direction, long *route)
> +..
> +
> +  - ``dev``: USB device to look up offload path mapping
> +  - ``card``: USB sound card index
> +  - ``pcm``: USB sound PCM device index
> +  - ``direction``: direction to fetch offload routing information
> +  - ``route``: mapping of sound card and pcm indexes for the offload path

nit-pick: again explain how the card and pcm indices are handled.


> +--------------------------------
> +USB devices can be hotplugged into the USB root hub at any point in time.

"root hub" really?

Is this really required? I would think the entire framework would work
just fine if the device is connected to any hub at any level, not just
"the" root hub.






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux