From: Li Jun <jun.li@xxxxxxx> SS_CON and U3 wakeup need 'ref_clk' on. iMX8MP turn off it while system sleep, So disable these wakeup source and only enable DP/DM wakeup source for host mode. Reviewed-by: Xu Yang <xu.yang_2@xxxxxxx> Signed-off-by: Li Jun <jun.li@xxxxxxx> Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- drivers/usb/dwc3/dwc3-imx8mp.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c index bd6953246f42e..02159cd820a10 100644 --- a/drivers/usb/dwc3/dwc3-imx8mp.c +++ b/drivers/usb/dwc3/dwc3-imx8mp.c @@ -96,7 +96,8 @@ static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx) writel(value, dwc3_imx->glue_base + USB_CTRL1); } -static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) +static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx, + pm_message_t msg) { struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3); u32 val; @@ -106,12 +107,14 @@ static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); - if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci) - val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN | - USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN; - else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) + if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci) { + val |= USB_WAKEUP_EN | USB_WAKEUP_DPDM_EN; + if (PMSG_IS_AUTO(msg)) + val |= USB_WAKEUP_SS_CONN | USB_WAKEUP_U3_EN; + } else { val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN | USB_WAKEUP_VBUS_SRC_SESS_VAL; + } writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); } @@ -307,7 +310,7 @@ static int dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx, pm_message_t msg) /* Wakeup enable */ if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev)) - dwc3_imx8mp_wakeup_enable(dwc3_imx); + dwc3_imx8mp_wakeup_enable(dwc3_imx, msg); dwc3_imx->pm_suspended = true; -- 2.34.1