So far that command was only used to read the response to
the Discover Identity Request, but it is handled with two
separate functions, which is not really necessary. Squashing
the command execution into a single function. That function
can now also be used to read other messages on top of the
Request Identity response.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 92 ++++++++++-------------------------
drivers/usb/typec/ucsi/ucsi.h | 12 -----
2 files changed, 27 insertions(+), 77 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 1f6e3f0d25c1..470c9532b4f2 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -748,104 +748,66 @@ static struct usb_power_delivery_capabilities *ucsi_get_pd_caps(struct ucsi_conn
&pd_caps);
}
-static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
- u8 offset, u8 bytes, void *resp)
+static int ucsi_get_pd_message(struct ucsi_connector *con, u8 recipient,
+ size_t bytes, void *data, u8 type)
{
- struct ucsi *ucsi = con->ucsi;
+ size_t len = min(bytes, UCSI_MAX_DATA_LENGTH(con->ucsi));
u64 command;
+ u8 offset;
int ret;
- command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
- UCSI_CONNECTOR_NUMBER(con->num);
- command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
- command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
- command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
- command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
-
- ret = ucsi_send_command(ucsi, command, resp, bytes);
- if (ret < 0)
- dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
-
- return ret;
-}
-
-static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
- struct usb_pd_identity *id)
-{
- struct ucsi *ucsi = con->ucsi;
- struct ucsi_pd_message_disc_id resp = {};
- int ret;
-
- if (ucsi->version < UCSI_VERSION_2_0) {
- /*
- * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
- * the 28 byte identity response including the VDM header.
- * First request the VDM header, ID Header VDO, Cert Stat VDO
- * and Product VDO.
- */
- ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
- if (ret < 0)
- return ret;
+ for (offset = 0; offset < bytes; offset += len) {
+ len = min(len, bytes - offset);
+ command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) | UCSI_CONNECTOR_NUMBER(con->num);
+ command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+ command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+ command |= UCSI_GET_PD_MESSAGE_BYTES(len);
+ command |= UCSI_GET_PD_MESSAGE_TYPE(type);
- /* Then request Product Type VDO1 through Product Type VDO3. */
- ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
- &resp.vdo[0]);
- if (ret < 0)
- return ret;
-
- } else {
- /*
- * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
- * the large enough to request the full Discover Identity
- * response at once.
- */
- ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+ ret = ucsi_send_command(con->ucsi, command, data + offset, len);
if (ret < 0)
return ret;
}
- id->id_header = resp.id_header;
- id->cert_stat = resp.cert_stat;
- id->product = resp.product;
- id->vdo[0] = resp.vdo[0];
- id->vdo[1] = resp.vdo[1];
- id->vdo[2] = resp.vdo[2];
return 0;
}
static int ucsi_get_partner_identity(struct ucsi_connector *con)
{
+ u32 vdo[7] = {};
int ret;
- ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
- &con->partner_identity);
+ ret = ucsi_get_pd_message(con, UCSI_RECIPIENT_SOP, sizeof(vdo), vdo,
+ UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
if (ret < 0)
return ret;
+ /* VDM Header is not part of struct usb_pd_identity, so dropping it. */
+ con->partner_identity = *(struct usb_pd_identity *)&vdo[1];
+
ret = typec_partner_set_identity(con->partner);
- if (ret < 0) {
- dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
- ret);
- }
+ if (ret < 0)
+ dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n", ret);
return ret;
}
static int ucsi_get_cable_identity(struct ucsi_connector *con)
{
+ u32 vdo[7] = {};
int ret;
- ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
- &con->cable_identity);
+ ret = ucsi_get_pd_message(con, UCSI_RECIPIENT_SOP_P, sizeof(vdo), vdo,
+ UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
if (ret < 0)
return ret;
+ con->cable_identity = *(struct usb_pd_identity *)&vdo[1];
+
ret = typec_cable_set_identity(con->cable);
- if (ret < 0) {
- dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
- ret);
- }
+ if (ret < 0)
+ dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n", ret);
return ret;
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 5e3c6cb822c8..c8c87377909d 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -352,18 +352,6 @@ struct ucsi_connector_status {
#define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3
} __packed;
-/*
- * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
- * Response Message Type set to Discover Identity Response.
- */
-struct ucsi_pd_message_disc_id {
- u32 vdm_header;
- u32 id_header;
- u32 cert_stat;
- u32 product;
- u32 vdo[3];
-} __packed;
-
/* -------------------------------------------------------------------------- */
struct ucsi_debugfs_entry {
--
2.43.0
