From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> The Qualcomm USB glue is not separate of the Synopsys DWC3 core and several of the snps,dwc3 properties (such as clocks and reset) conflicts in expectation with the Qualcomm integration. Using the newly split out Synopsys DWC3 core properties, describe the Qualcomm USB block in a single block. The new binding is a copy of qcom,dwc3 with the needed modifications. It would have been convenient to retain the two structures with the same compatibles, but as there exist no way to select a binding based on the absence of a subnode/patternProperty, a new generic compatible is introduced to describe this binding. To avoid redefining all the platform-specific compatibles, "select" is used to tell the DeviceTree validator which binding to use solely on the generic compatible. (Otherwise if the specific compatible matches during validation, the generic one must match as well) Mark qcom,dwc3 deprecated, to favor expressing future platforms using the new combined binding. Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> --- .../devicetree/bindings/usb/qcom,dwc3.yaml | 13 +- .../devicetree/bindings/usb/qcom,snps-dwc3.yaml | 608 +++++++++++++++++++++ 2 files changed, 620 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index efde47a5b145..739195ade20f 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -4,11 +4,22 @@ $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SuperSpeed DWC3 USB SoC controller +title: Legacy Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - Wesley Cheng <quic_wcheng@xxxxxxxxxxx> +# Use the combined qcom,snps-dwc3 instead +deprecated: true + +select: + properties: + compatible: + contains: + const: qcom,dwc3 + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml new file mode 100644 index 000000000000..331f63a7ef4a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -0,0 +1,608 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Wesley Cheng <quic_wcheng@xxxxxxxxxxx> + +description: + Describes the Qualcomm USB block, based on Synopsys DWC3. + +select: + properties: + compatible: + contains: + const: qcom,snps-dwc3 + required: + - compatible + +properties: + compatible: + items: + - enum: + - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 + - qcom,ipq5332-dwc3 + - qcom,ipq6018-dwc3 + - qcom,ipq8064-dwc3 + - qcom,ipq8074-dwc3 + - qcom,ipq9574-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8994-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,qcm2290-dwc3 + - qcom,qcs404-dwc3 + - qcom,qdu1000-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8180x-dwc3 + - qcom,sc8180x-dwc3-mp + - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp + - qcom,sdm660-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm6375-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + - qcom,x1e80100-dwc3 + - const: qcom,snps-dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + required-opps: + maxItems: 1 + + clocks: + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - cfg_noc:: System Config NOC clock. + - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >= + 60MHz for HS operation. + - iface:: System bus AXI clock. + - sleep:: Sleep clock, used for wakeup when USB3 core goes into low + power mode (U3). + - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host + mode. Its frequency should be 19.2MHz. + minItems: 1 + maxItems: 9 + + clock-names: + minItems: 1 + maxItems: 9 + + iommus: + maxItems: 1 + + resets: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: usb-ddr + - const: apps-usb + + interrupts: + description: | + Different types of interrupts are used based on HS PHY used on target: + - dwc_usb3: Core DWC3 interrupt + - pwr_event: Used for wakeup based on other power events. + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + hs_phy_irq which is not triggered by default and its + functionality is mutually exclusive to that of + {dp/dm}_hs_phy_irq and qusb2_phy_irq. + - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and + expose only a single IRQ whose behavior can be modified + by the QUSB2PHY_INTR_CTRL register. The required DPSE/ + DMSE configuration is done in QUSB2PHY_INTR_CTRL register + of PHY address space. + - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/ + DM pads of the SoC. These are used for wakeup + only on SoCs with non-QUSB2 targets with + exception of SDM670/SDM845/SM6350. + - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. + minItems: 3 + maxItems: 19 + + interrupt-names: + minItems: 3 + maxItems: 19 + + qcom,select-utmi-as-pipe-clk: + description: + If present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + + wakeup-source: true + +# Required child node: + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + +allOf: + - $ref: snps,dwc3-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + - qcom,ipq5332-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8064-dwc3 + then: + properties: + clocks: + items: + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq9574-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm6350-dwc3 + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + oneOf: + - items: + - const: core + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-dwc3 + - qcom,qdu1000-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,msm8994-dwc3 + - qcom,qcs404-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp + - qcom,x1e80100-dwc3 + then: + properties: + clocks: + maxItems: 9 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: noc_aggr + - const: noc_aggr_north + - const: noc_aggr_south + - const: noc_sys + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dwc3 + then: + properties: + clocks: + minItems: 4 + maxItems: 5 + clock-names: + oneOf: + - items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-dwc3 + - qcom,sc8180x-dwc3 + - qcom,sc8180x-dwc3-mp + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-dwc3 + then: + properties: + clocks: + minItems: 5 + maxItems: 6 + clock-names: + minItems: 5 + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,ipq6018-dwc3 + - qcom,ipq8074-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8998-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event + - const: qusb2_phy + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dwc3 + - qcom,qcs404-dwc3 + - qcom,sdm660-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + then: + properties: + interrupts: + minItems: 4 + maxItems: 5 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event + - const: qusb2_phy + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-dwc3 + then: + properties: + interrupts: + maxItems: 4 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,x1e80100-dwc3 + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + - qcom,ipq8064-dwc3 + - qcom,msm8994-dwc3 + - qcom,qdu1000-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8180x-dwc3 + - qcom,sc8280xp-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + interrupts: + minItems: 5 + maxItems: 6 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event + - const: hs_phy_irq + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-dwc3-mp + then: + properties: + interrupts: + minItems: 11 + maxItems: 11 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event_1 + - const: pwr_event_2 + - const: hs_phy_1 + - const: hs_phy_2 + - const: dp_hs_phy_1 + - const: dm_hs_phy_1 + - const: dp_hs_phy_2 + - const: dm_hs_phy_2 + - const: ss_phy_1 + - const: ss_phy_2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3-mp + then: + properties: + interrupts: + minItems: 19 + maxItems: 19 + interrupt-names: + items: + - const: dwc_usb3 + - const: pwr_event_1 + - const: pwr_event_2 + - const: pwr_event_3 + - const: pwr_event_4 + - const: hs_phy_1 + - const: hs_phy_2 + - const: hs_phy_3 + - const: hs_phy_4 + - const: dp_hs_phy_1 + - const: dm_hs_phy_1 + - const: dp_hs_phy_2 + - const: dm_hs_phy_2 + - const: dp_hs_phy_3 + - const: dm_hs_phy_3 + - const: dp_hs_phy_4 + - const: dm_hs_phy_4 + - const: ss_phy_1 + - const: ss_phy_2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + usb@a600000 { + compatible = "qcom,sdm845-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a600000 0 0x100000>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", "pwr_event", "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; +... -- 2.45.2
