X1E80100 has a multiport controller with 2 HS (eUSB) and 2 SS PHYs attached to it. It's commonly used for USB-A ports and internally routed devices. Configure it to support such functionality. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 170 +++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 326283822aee..b6dd2f47341b 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3842,6 +3842,90 @@ usb_2_hsphy: phy@88e0000 { status = "disabled"; }; + usb_mp_hsphy0: phy@88e1000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e1000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP0_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy1: phy@88e2000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e2000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_qmpphy0: phy@88e3000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e3000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp_qmpphy1: phy@88e5000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e5000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_1_ss2: usb@a0f8800 { compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; reg = <0 0x0a0f8800 0 0x400>; @@ -4016,6 +4100,92 @@ usb_2_dwc3_hs: endpoint { }; }; + usb_mp: usb@a4f8800 { + compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 52 IRQ_TYPE_EDGE_BOTH>, + <&pdc 51 IRQ_TYPE_EDGE_BOTH>, + <&pdc 54 IRQ_TYPE_EDGE_BOTH>, + <&pdc 53 IRQ_TYPE_EDGE_BOTH>, + <&pdc 55 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event_1", "pwr_event_2", + "hs_phy_1", "hs_phy_2", + "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "ss_phy_1", "ss_phy_2"; + + power-domains = <&gcc GCC_USB30_MP_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_mp_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1400 0x0>; + + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>; + phy-names = "usb2-0", "usb3-0", + "usb2-1", "usb3-1"; + dr_mode = "host"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + }; + }; + usb_1_ss0: usb@a6f8800 { compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; -- 2.46.0