From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx> Stall handling is managed in the 'process_*' functions, which are called right before the 'goto' stall handling code snippet. Thus, there should be a return after the 'process_*' functions. Otherwise, the stall code may run twice. Fixes: 1b349f214ac7 ("usb: xhci: add 'goto' for halted endpoint check in handle_tx_event()") Reported-by: Michal Pecio <michal.pecio@xxxxxxxxx> Signed-off-by: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b7517c3c8059..4ea2c3e072a9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2910,6 +2910,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, process_isoc_td(xhci, ep, ep_ring, td, ep_trb, event); else process_bulk_intr_td(xhci, ep, ep_ring, td, ep_trb, event); + return 0; check_endpoint_halted: if (xhci_halted_host_endpoint(ep_ctx, trb_comp_code)) -- 2.25.1