Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/08/2024 09:11, Xu Yang wrote:
> On Wed, Aug 07, 2024 at 07:59:02AM +0200, Krzysztof Kozlowski wrote:
>> On 07/08/2024 07:57, Xu Yang wrote:
>>> On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote:
>>>> On 06/08/2024 18:11, Frank Li wrote:
>>>>> On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote:
>>>>>> On 06/08/2024 07:06, Xu Yang wrote:
>>>>>>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
>>>>>>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
>>>>>>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
>>>>>>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also
>>>>>>> add orientation-switch and port property to the file.
>>>>>>>
>>>>>>> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
>>>>>>>
>>>>>>> ---
>>>>>>> Changes in v2:
>>>>>>>  - replace minItems with description in reg property
>>>>>>>  - remove orientation-switch and port
>>>>>>>  - refer to usb-switch.yaml
>>>>>>>  - use unevaluatedProperties
>>>>>>>
> [...]
>>>>>>
>>>>>> ref should be rather in top-level. You can always disallow certain
>>>>>> properties for devices, if they are really not applicable.
>>>>>
>>>>> There are some "required" in usb-switch.yaml,
>>>>>
>>>>> oneOf:
>>>>>   - required:
>>>>>       - port
>>>>>   - required:
>>>>>       - ports
>>>>>
>>>>> If put on the top, it may cause DTB check warning for other compatible
>>>>> strings, which have not support usb-switch.
>>>>
>>>> Hm, indeed, that's unusual case to have such different devices in one
>>>> schema. Did you test that above $ref in if: actually works?
>>>
>>> Yes, it works and this yaml pass dt_binding_check and dtbs_check. 
>>
>> I know it passes, I am asking whether it actually works. Is the $ref
>> actually effective? Is it properly applied?
> 
> If imx95 usb phy node doesn't contain "orientation-switch" and "port", dtb check will
> show below error:
> 
> usb/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: phy@4c1f0040: 'oneOf' conditional failed, one must be fixed:
>         'port' is a required property
>         'ports' is a required property
>         from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
> 
> Do you want other test results?

Thank you for confirmation, it's enough.

Best regards,
Krzysztof





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux