Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.
The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.
Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.
Signed-off-by: Foster Snowhill <forst@xxxxxx>
Tested-by: Georgi Valkov <gvalkov@xxxxxxxxx>
---
drivers/net/usb/ipheth.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 6eeef10edada..017255615508 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -286,11 +286,6 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
return;
}
- if (urb->actual_length <= IPHETH_IP_ALIGN) {
- dev->net->stats.rx_length_errors++;
- return;
- }
-
/* RX URBs starting with 0x00 0x01 do not encapsulate Ethernet frames,
* but rather are control frames. Their purpose is not documented, and
* they don't affect driver functionality, okay to drop them.
@@ -298,7 +293,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
* URB received from the bulk IN endpoint.
*/
if (unlikely
- (((char *)urb->transfer_buffer)[0] == 0 &&
+ (urb->actual_length == 4 &&
+ ((char *)urb->transfer_buffer)[0] == 0 &&
((char *)urb->transfer_buffer)[1] == 1))
goto rx_submit;
--
2.45.1
