Re: [PATCH] USB: serial: option: add MeiG Smart SRM825L

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024-08-03 14:46, ZHANG Yuntian wrote:
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2dee ProdID=4d22 Rev= 4.14
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms


That ProdID is already used by MeiG SR815 which has the same composition but different Protocol values. Is MeiG really that short of ProductID's that they have to cannibalize on an already used one?

lsusb for SR815:

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0	
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1	
P: Vendor=2dee ProdID=4d22 Rev= 4.14	
S: Manufacturer=MEIG	
S: Product=LTE-A Module	
S: SerialNumber=123456	
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA	
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)	
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)	
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms	
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)	
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms	
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)	
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms	
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)	
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)	
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms	
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms	
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms


thanks
Lars






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux