Re: [PATCH v24 15/34] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/1/24 03:17, Wesley Cheng wrote:
> The QC ADSP is able to support USB playback endpoints, so that the main
> application processor can be placed into lower CPU power modes.  This adds
> the required AFE port configurations and port start command to start an
> audio session.
> 
> Specifically, the QC ADSP can support all potential endpoints that are
> exposed by the audio data interface.  This includes, feedback endpoints
> (both implicit and explicit) as well as the isochronous (data) endpoints.
> The size of audio samples sent per USB frame (microframe) will be adjusted
> based on information received on the feedback endpoint.
> 
> Some pre-requisites are needed before issuing the AFE port start command,
> such as setting the USB AFE dev_token.  This carries information about the
> available USB SND cards and PCM devices that have been discovered on the
> USB bus.  The dev_token field is used by the audio DSP to notify the USB
> offload driver of which card and PCM index to enable playback on.

It's just fine if the AFE stuff relies on the 'port' definition/concept,
but I don't think it needs to pop-up at the ASoC/USB level.






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux