There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u32_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx> --- drivers/usb/dwc3/dwc3-octeon.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c index 6010135e1acc..1a3b205367fd 100644 --- a/drivers/usb/dwc3/dwc3-octeon.c +++ b/drivers/usb/dwc3/dwc3-octeon.c @@ -419,7 +419,7 @@ static int dwc3_octeon_probe(struct platform_device *pdev) int ref_clk_sel, ref_clk_fsel, mpll_mul; int power_active_low, power_gpio; int err, len; - u32 clock_rate; + u32 clock_rate, gpio_pwr[3]; if (of_property_read_u32(node, "refclk-frequency", &clock_rate)) { dev_err(dev, "No UCTL \"refclk-frequency\"\n"); @@ -476,21 +476,10 @@ static int dwc3_octeon_probe(struct platform_device *pdev) power_gpio = DWC3_GPIO_POWER_NONE; power_active_low = 0; - if (of_find_property(node, "power", &len)) { - u32 gpio_pwr[3]; - - switch (len) { - case 8: - of_property_read_u32_array(node, "power", gpio_pwr, 2); - break; - case 12: - of_property_read_u32_array(node, "power", gpio_pwr, 3); + len = of_property_read_variable_u32_array(node, "power", gpio_pwr, 2, 3); + if (len > 0) { + if (len == 3) power_active_low = gpio_pwr[2] & 0x01; - break; - default: - dev_err(dev, "invalid power configuration\n"); - return -EINVAL; - } power_gpio = gpio_pwr[1]; } -- 2.43.0