Re: [PATCH V2 06/16] drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/28/24 08:41, Stefan Wahren wrote:
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.

This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.

Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>

Reviewed-by: Maíra Canal <mcanal@xxxxxxxxxx>

Best Regards,
- Maíra

---
  drivers/gpu/drm/vc4/vc4_hdmi.c | 8 +++++++-
  1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index d57c4a5948c8..cb424604484f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -429,6 +429,7 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
  {
  	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
  	enum drm_connector_status status = connector_status_disconnected;
+	int ret;

  	/*
  	 * NOTE: This function should really take vc4_hdmi->mutex, but
@@ -441,7 +442,12 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
  	 * the lock for now.
  	 */

-	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret) {
+		drm_err_once(connector->dev, "Failed to retain HDMI power domain: %d\n",
+			     ret);
+		return connector_status_unknown;
+	}

  	if (vc4_hdmi->hpd_gpio) {
  		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
--
2.34.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux