[PATCH v2] usb: dwc3: Runtime get and put usb power_supply handle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is possible that the usb power_supply is registered after the probe
of dwc3. In this case, trying to get the usb power_supply during the
probe will fail and there is no chance to try again. Also the usb
power_supply might be unregistered at anytime so that the handle of it
in dwc3 would become invalid. To fix this, get the handle right before
calling to power_supply functions and put it afterward.

Fixes: 6f0764b5adea ("usb: dwc3: add a power supply for current control")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
---
v1 -> v2:
- move power_supply_put out of interrupt context

 drivers/usb/dwc3/core.c   | 62 ++++++++++++++++++++++++++-------------
 drivers/usb/dwc3/core.h   | 10 +++++--
 drivers/usb/dwc3/gadget.c | 10 +------
 3 files changed, 51 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 734de2a8bd21..9978067b7734 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -283,6 +283,38 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 	queue_work(system_freezable_wq, &dwc->drd_work);
 }
 
+static void __dwc3_set_gadget_vbus_draw(struct work_struct *work)
+{
+	struct dwc3 *dwc = vbus_work_to_dwc(work);
+	struct power_supply *usb_psy;
+	union power_supply_propval val = {};
+	int ret;
+
+	usb_psy = power_supply_get_by_name(dwc->usb_psy_name);
+	if (!usb_psy) {
+		dev_err(dwc->dev, "couldn't get usb power supply\n");
+		return;
+	}
+
+	val.intval = 1000 * READ_ONCE(dwc->vbus_draw_ma);
+	ret = power_supply_set_property(usb_psy, POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+	if (ret < 0)
+		dev_err(dwc->dev, "failed to set power supply property\n");
+
+	power_supply_put(usb_psy);
+}
+
+int dwc3_set_gadget_vbus_draw(struct dwc3 *dwc, unsigned int mA)
+{
+	if (!dwc->usb_psy_name)
+		return -EOPNOTSUPP;
+
+	WRITE_ONCE(dwc->vbus_draw_ma, mA);
+	queue_work(system_highpri_wq, &dwc->vbus_draw_work);
+
+	return 0;
+}
+
 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
 {
 	struct dwc3		*dwc = dep->dwc;
@@ -1631,8 +1663,6 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			tx_thr_num_pkt_prd = 0;
 	u8			tx_max_burst_prd = 0;
 	u8			tx_fifo_resize_max_num;
-	const char		*usb_psy_name;
-	int			ret;
 
 	/* default to highest possible threshold */
 	lpm_nyet_threshold = 0xf;
@@ -1667,12 +1697,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->sys_wakeup = device_may_wakeup(dwc->sysdev);
 
-	ret = device_property_read_string(dev, "usb-psy-name", &usb_psy_name);
-	if (ret >= 0) {
-		dwc->usb_psy = power_supply_get_by_name(usb_psy_name);
-		if (!dwc->usb_psy)
-			dev_err(dev, "couldn't get usb power supply\n");
-	}
+	device_property_read_string(dev, "usb-psy-name", &dwc->usb_psy_name);
 
 	dwc->has_lpm_erratum = device_property_read_bool(dev,
 				"snps,has-lpm-erratum");
@@ -2130,21 +2155,22 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	dwc3_get_properties(dwc);
 
+	if (dwc->usb_psy_name)
+		INIT_WORK(&dwc->vbus_draw_work, __dwc3_set_gadget_vbus_draw);
+
 	dwc3_get_software_properties(dwc);
 
 	dwc->reset = devm_reset_control_array_get_optional_shared(dev);
-	if (IS_ERR(dwc->reset)) {
-		ret = PTR_ERR(dwc->reset);
-		goto err_put_psy;
-	}
+	if (IS_ERR(dwc->reset))
+		return PTR_ERR(dwc->reset);
 
 	ret = dwc3_get_clocks(dwc);
 	if (ret)
-		goto err_put_psy;
+		return ret;
 
 	ret = reset_control_deassert(dwc->reset);
 	if (ret)
-		goto err_put_psy;
+		return ret;
 
 	ret = dwc3_clk_enable(dwc);
 	if (ret)
@@ -2245,9 +2271,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc3_clk_disable(dwc);
 err_assert_reset:
 	reset_control_assert(dwc->reset);
-err_put_psy:
-	if (dwc->usb_psy)
-		power_supply_put(dwc->usb_psy);
 
 	return ret;
 }
@@ -2258,6 +2281,8 @@ static void dwc3_remove(struct platform_device *pdev)
 
 	pm_runtime_get_sync(&pdev->dev);
 
+	if (dwc->usb_psy_name)
+		cancel_work_sync(&dwc->vbus_draw_work);
 	dwc3_core_exit_mode(dwc);
 	dwc3_debugfs_exit(dwc);
 
@@ -2276,9 +2301,6 @@ static void dwc3_remove(struct platform_device *pdev)
 	pm_runtime_set_suspended(&pdev->dev);
 
 	dwc3_free_event_buffers(dwc);
-
-	if (dwc->usb_psy)
-		power_supply_put(dwc->usb_psy);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1e561fd8b86e..b82eed4ad2b2 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -993,6 +993,8 @@ struct dwc3_scratchpad_array {
 /**
  * struct dwc3 - representation of our controller
  * @drd_work: workqueue used for role swapping
+ * @vbus_draw_work: work used for setting Vbus current through power_supply
+ * @vbus_draw_ma: Vbus current draw to be set
  * @ep0_trb: trb which is used for the ctrl_req
  * @bounce: address of bounce buffer
  * @setup_buf: used while precessing STD USB requests
@@ -1045,7 +1047,7 @@ struct dwc3_scratchpad_array {
  * @role_sw: usb_role_switch handle
  * @role_switch_default_mode: default operation mode of controller while
  *			usb role is USB_ROLE_NONE.
- * @usb_psy: pointer to power supply interface.
+ * @usb_psy_name: name of the usb power supply interface.
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to array of USB2 PHYs
@@ -1163,6 +1165,8 @@ struct dwc3_scratchpad_array {
  */
 struct dwc3 {
 	struct work_struct	drd_work;
+	struct work_struct	vbus_draw_work;
+	unsigned int		vbus_draw_ma;
 	struct dwc3_trb		*ep0_trb;
 	void			*bounce;
 	u8			*setup_buf;
@@ -1223,7 +1227,7 @@ struct dwc3 {
 	struct usb_role_switch	*role_sw;
 	enum usb_dr_mode	role_switch_default_mode;
 
-	struct power_supply	*usb_psy;
+	const char		*usb_psy_name;
 
 	u32			fladj;
 	u32			ref_clk_per;
@@ -1394,6 +1398,7 @@ struct dwc3 {
 #define INCRX_UNDEF_LENGTH_BURST_MODE 1
 
 #define work_to_dwc(w)		(container_of((w), struct dwc3, drd_work))
+#define vbus_work_to_dwc(w)	container_of((w), struct dwc3, vbus_draw_work)
 
 /* -------------------------------------------------------------------------- */
 
@@ -1554,6 +1559,7 @@ struct dwc3_gadget_ep_cmd_params {
 /* prototypes */
 void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+int dwc3_set_gadget_vbus_draw(struct dwc3 *dwc, unsigned int mA);
 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
 
 #define DWC3_IP_IS(_ip)							\
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89fc690fdf34..93bf348c24eb 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3050,19 +3050,11 @@ static void dwc3_gadget_set_ssp_rate(struct usb_gadget *g,
 static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
-	union power_supply_propval	val = {0};
-	int				ret;
 
 	if (dwc->usb2_phy)
 		return usb_phy_set_power(dwc->usb2_phy, mA);
 
-	if (!dwc->usb_psy)
-		return -EOPNOTSUPP;
-
-	val.intval = 1000 * mA;
-	ret = power_supply_set_property(dwc->usb_psy, POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
-
-	return ret;
+	return dwc3_set_gadget_vbus_draw(dwc, mA);
 }
 
 /**
-- 
2.46.0.rc1.232.g9752f9e123-goog





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux