Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not supported for SPIs and results in probe failure with -EINVAL. Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Fixes: 927173bf8a0e ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332") Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq5332.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 7e8f9d578382..71328b223531 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -322,8 +322,8 @@ usb: usb@8af8800 { reg = <0x08af8800 0x400>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>; + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq"; -- 2.34.1