Re: [PATCH v2] xhci: Don't issue Reset Device command to Etron xHCI host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> 於 2024年6月19日 週三 下午2:15寫道:
>
> On Wed, Jun 19, 2024 at 01:48:08PM +0800, Kuangyi Chiang wrote:
> > Sometimes the hub driver does not recognize the USB device connected
> > to the external USB2.0 hub when the system resumes from S4.
> >
> > This happens when the xHCI driver issue the Reset Device command to
> > inform the Etron xHCI host that the USB device has been reset.
> >
> > Seems that the Etron xHCI host can not perform this command correctly,
> > affecting the USB device.
> >
> > Instead, to avoid this, disabling slot ID and then enabling slot ID
> > is a workable solution to replace the Reset Device command.
> >
> > An easy way to issue these commands in sequence is to call
> > xhci_free_dev() and then xhci_alloc_dev().
> >
> > Applying this patch then the issue is gone.
> >
> > Cc: <stable@xxxxxxxxxxxxxxx>
> > Signed-off-by: Kuangyi Chiang <ki.chiang65@xxxxxxxxx>
>
> What commit id does this fix?

Fixes: 2a8f82c4ceaf ("USB: xhci: Notify the xHC when a device is reset.")

However, this patch is a workaround for Etron xHCI hosts, should I add this
in the commit message?

>
> > ---
> > Changes in v2:
> > - Change commit log
> > - Add a comment for the workaround
> > - Revert "global xhci_free_dev()"
> > - Remove XHCI_ETRON_HOST quirk bit
> >
> >  drivers/usb/host/xhci.c | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > index 37eb37b0affa..c892750a89c5 100644
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -3682,6 +3682,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
> >                               xhci->num_active_eps);
> >  }
> >
> > +static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
> > +
> >  /*
> >   * This submits a Reset Device Command, which will set the device state to 0,
> >   * set the device address to 0, and disable all the endpoints except the default
> > @@ -3752,6 +3754,20 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
> >                                               SLOT_STATE_DISABLED)
> >               return 0;
> >
> > +     if (dev_is_pci(hcd->self.controller) &&
> > +             to_pci_dev(hcd->self.controller)->vendor == 0x1b6f) {
>
> Odd indentation :(

Oops, one tab is missing, right? I will modify it.

>
> Also, that's a specific value, shouldn't it be in a #define somewhere?

OK, I will add a #define near xhci_discover_or_reset_device() in the same file.

>
> > +             /*
> > +              * Disabling and then enabling device slot ID to inform xHCI
> > +              * host that the USB device has been reset.
> > +              */
> > +             xhci_free_dev(hcd, udev);
> > +             ret = xhci_alloc_dev(hcd, udev);
>
> You are relying on the behavior of free/alloc here to disable/enable the
> slot id, why not just do that instead?  What happens if the free/alloc
> call stops doing that?  This feels very fragile to me.
>

These functions are helpers that can be used to enable/disable the slot id
and allocate/free associated data structures, I think they should be
called, right?

Or you would like to call xhci_disable_slot() + xhci_alloc_dev(), as in commit
651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command").

If so, I will modify it and resend this patch.

> > +             if (ret == 1)
> > +                     return 0;
> > +             else
> > +                     return -EINVAL;
>
> Why -EINVAL?  What value was wrong?

I followed commit f0615c45ce5f ("USB: xHCI: change xhci_reset_device()
to allocate new device") to return -EINVAL, I think it means running out of
device slots.

>
> thanks,
>
> greg k-h

Thanks,
Kuangyi Chiang





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux