On Thu, Jun 20, 2024 at 07:58:13AM +0200, Giacinto Cifelli wrote: > greetings, > > question: > > on a system (yocto), I have a usb composition that doesn't assign the > class for the interfaces: > |__ Port 1: Dev 2, If 1, Class=, Driver=usbhid, 1.5M > |__ Port 1: Dev 2, If 0, Class=, Driver=usbhid, 1.5M > |__ Port 3: Dev 3, If 10, Class=, Driver=cdc_mbim, 480M > |__ Port 3: Dev 3, If 8, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 6, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 4, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 2, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 11, Class=, Driver=cdc_mbim, 480M > |__ Port 3: Dev 3, If 0, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 9, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 7, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 5, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 3, Class=, Driver=cdc_acm, 480M > |__ Port 3: Dev 3, If 1, Class=, Driver=cdc_acm, 480M > Kernel: Linux version 6.1.35 (oe-user@oe-host) (x86_64-poky-linux-gcc > (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP > PREEMPT_DYNAMIC Thu Jun 22 18:03:13 UTC 2023 > > instead of (arch): > |__ Port 004: Dev 004, If 0, Class=Communications, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 1, Class=CDC Data, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 2, Class=Communications, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 3, Class=CDC Data, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 4, Class=Communications, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 5, Class=CDC Data, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 6, Class=Communications, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 7, Class=CDC Data, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 8, Class=Communications, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 9, Class=CDC Data, Driver=cdc_acm, 5000M > |__ Port 004: Dev 004, If 10, Class=Communications, Driver=cdc_mbim, 5000M > |__ Port 004: Dev 004, If 11, Class=CDC Data, Driver=cdc_mbim, 5000M > Kernel: Linux 6.6.34-1-lts #1 SMP PREEMPT_DYNAMIC Sun, 16 Jun 2024 > 14:45:31 +0000 x86_64 GNU/Linux > > This lack of class creates too many /dev/ttyACMx ports, and > ModemManager tries to access them all, perhaps also blocking the > device, and the whole system doesn't work. > > For completeness, the device is: > Bus 002 Device 004: ID 1e2d:0065 Gemalto M2M GmbH LTE Modem > which is supported without any customs in the cdc-acm and cdc_mbim drivers. > > I spotted only two options not compiled-in in the yocto .config > (compared with the arch one), but I strongly doubt this is related: > CONFIG_USB_G_MULTI > CONFIG_USB_G_MULTI_CDC > > Would you know why the class is not assigned? This is just a userspace issue, right? Or are you saying that somehow the same device plugged into two different systems works differently? Note that 6.6 is a year older than 6.1 so perhaps you just need to update your system running 6.1? Odds are there's a quirk for this device in newer kernels. Also, 6.1.35 is VERY old and obsolete and full of known security holes that have been fixed. Please update to the latest 6.1.y release as soon as possible. thanks, greg k-h
