Re: [PATCH v5] usb: dwc3: core: Workaround for CSR read timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 19, 2024 at 5:40 AM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> wrote:
>
> On Tue, Jun 18, 2024, joswang wrote:
> > From: Jos Wang <joswang@xxxxxxxxxx>
> >
> > This is a workaround for STAR 4846132, which only affects
> > DWC_usb31 version2.00a operating in host mode.
> >
> > There is a problem in DWC_usb31 version 2.00a operating
> > in host mode that would cause a CSR read timeout When CSR
> > read coincides with RAM Clock Gating Entry. By disable
> > Clock Gating, sacrificing power consumption for normal
> > operation.
> >
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Jos Wang <joswang@xxxxxxxxxx>
> > ---
> > v4 -> v5: no change
> > v3 -> v4: modify commit message, add Cc: stable@xxxxxxxxxxxxxxx
> > v2 -> v3:
> > - code refactor
> > - modify comment, add STAR number, workaround applied in host mode
> > - modify commit message, add STAR number, workaround applied in host mode
> > - modify Author Jos Wang
> > v1 -> v2: no change
> >
> >  drivers/usb/dwc3/core.c | 20 +++++++++++++++++++-
> >  1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 7ee61a89520b..2a3adc80fe0f 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -957,12 +957,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
> >
> >  static void dwc3_core_setup_global_control(struct dwc3 *dwc)
> >  {
> > +     unsigned int power_opt;
> > +     unsigned int hw_mode;
> >       u32 reg;
> >
> >       reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> >       reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
> > +     hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> > +     power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
> >
> > -     switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
> > +     switch (power_opt) {
> >       case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
> >               /**
> >                * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
> > @@ -995,6 +999,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
> >               break;
> >       }
> >
> > +     /*
> > +      * This is a workaround for STAR#4846132, which only affects
> > +      * DWC_usb31 version2.00a operating in host mode.
> > +      *
> > +      * There is a problem in DWC_usb31 version 2.00a operating
> > +      * in host mode that would cause a CSR read timeout When CSR
> > +      * read coincides with RAM Clock Gating Entry. By disable
> > +      * Clock Gating, sacrificing power consumption for normal
> > +      * operation.
> > +      */
> > +     if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO &&
> > +         hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A))
> > +             reg |= DWC3_GCTL_DSBLCLKGTNG;
> > +
> >       /* check if current dwc3 is on simulation board */
> >       if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
> >               dev_info(dwc->dev, "Running with FPGA optimizations\n");
> > --
> > 2.17.1
> >
>
> Why are there two v5 patches? This will confuse reviewers. Please create
> a new version on every new submission however small the change is.
> Please send v6.
>
> Thanks,
> Thinh

Sorry, I will submit v6

Thanks,
Jos Wang





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux