> -----Original Message-----
> From: Li, Meng
> Sent: Wednesday, June 19, 2024 9:49 AM
> To: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; quic_uaggarwa@xxxxxxxxxxx; linux-
> usb@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; xu.yang_2@xxxxxxx
> Subject: RE: [v2 PATCH] usb: dwc3: core: remove lock of otg mode during
> gadget suspend/resume to avoid deadlock
>
>
>
> > -----Original Message-----
> > From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> > Sent: Wednesday, June 19, 2024 5:54 AM
> > To: Li, Meng <Meng.Li@xxxxxxxxxxxxx>
> > Cc: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>;
> > gregkh@xxxxxxxxxxxxxxxxxxx; quic_uaggarwa@xxxxxxxxxxx; linux-
> > usb@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; xu.yang_2@xxxxxxx
> > Subject: Re: [v2 PATCH] usb: dwc3: core: remove lock of otg mode
> > during gadget suspend/resume to avoid deadlock
> >
> > CAUTION: This email comes from a non Wind River email account!
> > Do not click links or open attachments unless you recognize the sender
> > and know the content is safe.
> >
> > On Tue, Jun 18, 2024, Meng Li wrote:
> > > When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger
> > system
> > > to enter suspend status with below command:
> > > echo mem > /sys/power/state
> > > There will be a deadlock issue occurring. Detailed invoking path as
> > > below:
> > > dwc3_suspend_common()
> > > spin_lock_irqsave(&dwc->lock, flags); <-- 1st
> > > dwc3_gadget_suspend(dwc);
> > > dwc3_gadget_soft_disconnect(dwc);
> > > spin_lock_irqsave(&dwc->lock, flags); <-- 2nd
> > > This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget:
> > > Fix NULL pointer dereference in dwc3_gadget_suspend") that removes
> > > the code of checking whether dwc->gadget_driver is NULL or not. It
> > > causes the following code is executed and deadlock occurs when
> > > trying to get the spinlock. In fact, the root cause is the commit
> 5265397f9442("usb:
> > dwc3:
> > > Remove DWC3 locking during gadget suspend/resume") that forgot to
> > > remove the lock of otg mode. So, remove the redundant lock of otg
> > > mode during gadget suspend/resume.
> > >
> > > Fixes: 5265397f9442 ("usb: dwc3: Remove DWC3 locking during gadget
> > > suspend/resume")
> > > Cc: Xu Yang <xu.yang_2@xxxxxxx>
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > Signed-off-by: Meng Li <Meng.Li@xxxxxxxxxxxxx>
> > >
> > > ---
> > > v1->v2:
> > > - improve commit log, correct the Fixes commit id.
> > >
> > > ---
> > > drivers/usb/dwc3/core.c | 6 ------
> > > 1 file changed, 6 deletions(-)
> > >
> > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
> > > 7ee61a89520b..9d47c3aa5777 100644
> > > --- a/drivers/usb/dwc3/core.c
> > > +++ b/drivers/usb/dwc3/core.c
> > > @@ -2250,7 +2250,6 @@ static int dwc3_core_init_for_resume(struct
> > dwc3
> > > *dwc)
> > >
> > > static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t
> msg)
> > {
> > > - unsigned long flags;
> > > u32 reg;
> > > int i;
> > >
> > > @@ -2293,9 +2292,7 @@ static int dwc3_suspend_common(struct dwc3
> > *dwc, pm_message_t msg)
> > > break;
> > >
> > > if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
> > > - spin_lock_irqsave(&dwc->lock, flags);
> > > dwc3_gadget_suspend(dwc);
> > > - spin_unlock_irqrestore(&dwc->lock, flags);
> > > synchronize_irq(dwc->irq_gadget);
> > > }
> > >
> > > @@ -2312,7 +2309,6 @@ static int dwc3_suspend_common(struct dwc3
> > *dwc,
> > > pm_message_t msg)
> > >
> > > static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
> {
> > > - unsigned long flags;
> > > int ret;
> > > u32 reg;
> > > int i;
> > > @@ -2366,9 +2362,7 @@ static int dwc3_resume_common(struct dwc3
> > *dwc, pm_message_t msg)
> > > if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) {
> > > dwc3_otg_host_init(dwc);
> > > } else if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
> > > - spin_lock_irqsave(&dwc->lock, flags);
> > > dwc3_gadget_resume(dwc);
> > > - spin_unlock_irqrestore(&dwc->lock, flags);
> > > }
> > >
> > > break;
> > > --
> > > 2.34.1
> > >
> >
> > Did you use "git format-patch -v"? The $subject version prefix order
> > is different. In any case,
> >
>
> Sorry! I use --subject-prefix="v2 PATCH".
> I will correct it in next patch pull request.
>
> Thanks,
> Limeng
>
Do I need to send another v3 pull request?
Thanks,
LImeng
> > Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> >
> > Thanks,
> > Thinh
