https://bugzilla.kernel.org/show_bug.cgi?id=218943 --- Comment #29 from Lars Melin (larsm17@xxxxxxxxx) --- (In reply to Jarrard from comment #28) > I have 10Gbps hub connect to same port now and it shows as 10Gbps. > The VIA Hub at 5Gbps is wrong and possibly created by the AverMedia device > which is also wrong. But it does not appear when I use a physical 10Gbps hub > however the AverMedia device is still wrong. The detection of a hub can not be wrong, what you see is descriptors read from a hub so it is present and probably built into the AverMedia device which from what your usbdevice screenshoot shows also have an RGB light controller as a separate device. The only reason for having a hub is to be able to connect more devices to a bus so you should at least find out where it comes from. Does the hub appear if you disconnect the AverMedia device? Does it appear if connect another USB device to the same computer port? I guess not, I guess it is inside the AVerMedia device. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
