TGL systems have the same issue as ADL, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to TGL as well. The issue it fixes is a ~20s boot time delay when booting from S5. It affects TGL devices, and TGL support was added starting from v5.3. Signed-off-by: Reka Norman <rekanorman@xxxxxxxxxxxx> --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c040d816e626..137bd3da1128 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -49,6 +49,7 @@ #define PCI_DEVICE_ID_INTEL_DENVERTON_XHCI 0x19d0 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 +#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_PCH_XHCI 0xa0ed #define PCI_DEVICE_ID_INTEL_COMET_LAKE_XHCI 0xa3af #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed @@ -372,7 +373,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_INTEL && - (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || + (pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_PCH_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) xhci->quirks |= XHCI_RESET_TO_DEFAULT; -- 2.45.2.505.gda0bf45e8d-goog
