Re: [PATCH 2/2] usb: typec-mux: nb7vpq904m: broadcast typec state to next mux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/05/2024 11:18, Dmitry Baryshkov wrote:
On Mon, May 27, 2024 at 09:45:30AM +0200, Neil Armstrong wrote:
In the Type-C graph, the nb7vpq904m retimer is in between the USB-C
connector and the USB3/DP combo PHY, and this PHY also requires the
USB-C mode events to properly set-up the SuperSpeed Lanes functions
to setup USB3-only, USB3 + DP Altmode or DP Altmode only on the 4 lanes.

Update the nb7vpq904m retimer to get an optional type-c mux on the next
endpoint, and broadcast the received mode to it.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  drivers/usb/typec/mux/nb7vpq904m.c | 29 +++++++++++++++++++++++++++--
  1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/mux/nb7vpq904m.c b/drivers/usb/typec/mux/nb7vpq904m.c
index b17826713753..efb10f890fed 100644
--- a/drivers/usb/typec/mux/nb7vpq904m.c
+++ b/drivers/usb/typec/mux/nb7vpq904m.c
@@ -69,6 +69,7 @@ struct nb7vpq904m {
bool swap_data_lanes;
  	struct typec_switch *typec_switch;
+	struct typec_mux *typec_mux;
struct mutex lock; /* protect non-concurrent retimer & switch */ @@ -275,6 +276,7 @@ static int nb7vpq904m_sw_set(struct typec_switch_dev *sw, enum typec_orientation
  static int nb7vpq904m_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state)
  {
  	struct nb7vpq904m *nb7 = typec_retimer_get_drvdata(retimer);
+	struct typec_mux_state mux_state;
  	int ret = 0;
mutex_lock(&nb7->lock);
@@ -292,7 +294,14 @@ static int nb7vpq904m_retimer_set(struct typec_retimer *retimer, struct typec_re
mutex_unlock(&nb7->lock); - return ret;
+	if (ret)
+		return ret;
+
+	mux_state.alt = state->alt;
+	mux_state.data = state->data;
+	mux_state.mode = state->mode;
+
+	return typec_mux_set(nb7->typec_mux, &mux_state);
  }
static const struct regmap_config nb7_regmap = {
@@ -411,9 +420,16 @@ static int nb7vpq904m_probe(struct i2c_client *client)
  		return dev_err_probe(dev, PTR_ERR(nb7->typec_switch),
  				     "failed to acquire orientation-switch\n");
+ nb7->typec_mux = fwnode_typec_mux_get(dev->fwnode);
+	if (IS_ERR(nb7->typec_mux)) {
+		ret = dev_err_probe(dev, PTR_ERR(nb7->typec_mux),
+				    "Failed to acquire mode-switch\n");
+		goto err_switch_put;
+	}
+
  	ret = nb7vpq904m_parse_data_lanes_mapping(nb7);
  	if (ret)
-		return ret;
+		goto err_mux_put;
ret = regulator_enable(nb7->vcc_supply);
  	if (ret)
@@ -456,6 +472,12 @@ static int nb7vpq904m_probe(struct i2c_client *client)
  	gpiod_set_value(nb7->enable_gpio, 0);
  	regulator_disable(nb7->vcc_supply);
+err_mux_put:
+	typec_mux_put(nb7->typec_mux);
+
+err_switch_put:
+	typec_switch_put(nb7->typec_switch);

Same comment, typec_switch_put should go to a separate commit. IMHO it
almost begs us to have devm_fwnode_typec_mux_get() and
devm_fwnode_typec_switch_get().

Yep

Thx,
Neil


+
  	return ret;
  }
@@ -469,6 +491,9 @@ static void nb7vpq904m_remove(struct i2c_client *client)
  	gpiod_set_value(nb7->enable_gpio, 0);
regulator_disable(nb7->vcc_supply);
+
+	typec_mux_put(nb7->typec_mux);
+	typec_switch_put(nb7->typec_switch);
  }
static const struct i2c_device_id nb7vpq904m_table[] = {

--
2.34.1







[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux