[PATCH 2/4] Revert "usb: musb: da8xx: Set phy in OTG mode by default"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit 7ccf62941a38701ec9a42b4a0fa2868af456e96a.

da8xx_musb_set_mode() forces OTG mode regardless the selected mode even
if the property 'dr_mode = "host"' is present in device-tree. This
causes an unrecoverable error when VBUS supply is shut down : plugged
gadgets are no longer detected once VBUS supply is back.

Reverting it allows to have a selected mode coherent with device-tree's
description. IMO, this shouldn't cause regression because OTG mode is
the default selection when 'dr_mode' property is not set.

Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
 drivers/usb/musb/da8xx.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 8abf3a567e30..1681f9fba3da 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -328,13 +328,6 @@ static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
 	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
 	enum phy_mode phy_mode;
 
-	/*
-	 * The PHY has some issues when it is forced in device or host mode.
-	 * Unless the user request another mode, configure the PHY in OTG mode.
-	 */
-	if (!musb->is_initialized)
-		return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);
-
 	switch (musb_mode) {
 	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
 		phy_mode = PHY_MODE_USB_HOST;
-- 
2.44.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux