On Wed, May 22, 2024 at 05:17:02PM +0000, Thinh Nguyen wrote:
On Wed, May 22, 2024, Alan Stern wrote:On Wed, May 22, 2024 at 01:41:42AM +0000, Thinh Nguyen wrote: > On Wed, May 22, 2024, Michael Grzeschik wrote: > > On Fri, May 17, 2024 at 01:44:05AM +0000, Thinh Nguyen wrote: > > > For isoc endpoint IN, yes. If the host requests for isoc data IN while > > > no TRB is prepared, then the controller will automatically send 0-length > > > packet respond. > > > > Perfect! This will help a lot and will make active queueing of own > > zero-length requests run unnecessary. > > Yes, if we rely on the current start/stop isoc transfer scheme for UVC, > then this will work. You shouldn't rely on this behavior. Other device controllers might not behave this way; they might send no packet at all to the host (causing a USB protocol error) instead of sending a zero-length packet.I agree. The dwc3 driver has this workaround to somewhat work with the UVC. This behavior is not something the controller expected, and this workaround should not be a common behavior for different function driver/protocol. Since this behavior was added a long time ago, it will remain the default behavior in dwc3 to avoid regression with UVC (at least until the UVC is changed). However, it would be nice for UVC to not rely on this.
With "this" you mean exactly the following commit, right? (f5e46aa4 usb: dwc3: gadget: when the started list is empty stop the active xfer) When we start questioning this, then lets dig deeper here. With the fast datarate of at least usb superspeed shouldn't they not all completely work asynchronous with their in flight trbs? In my understanding this validates that, with at least superspeed we are unlikely to react fast enough to maintain a steady isoc dataflow, since the driver above has to react to errors in the processing context. This runs the above patch (f5e46aa4) a gadget independent solution which has nothing to do with uvc in particular IMHO. How do other controllers and their drivers work?
Side note, when the dwc3 driver reschedules/starts isoc transfer again, the first transfer will be scheduled go out at some future interval and not the next immediate microframe. For UVC, it probably won't be a problem since it doesn't seem to need data going out every interval.
It should not make a difference. [TM]
On the other hand, it may not make any difference. The host's UVC driver most likely won't care about the difference between no packet and a 0-length packet. :-) Alan Stern
-- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
