Re: [REGRESSION][BISECTED] "xHCI host controller not responding, assume dead" on stable kernel > 6.8.7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you Mika,

Here you have the output of sudo journalctl -k without enabling the
kernel option "pcie_aspm=off": https://codeshare.io/7JPgpE. Without
"pcie_aspm=off", "thunderbolt.host_reset=false" is not needed, my
thunderbolt dock does work. I also connected a 4k monitor to the
thunderbolt dock thinking it could provide more data.

I'm almost sure I used this option when I set up this system because
it solved some issues with system suspending, but it happened many
months ago.



On Tue, May 21, 2024 at 7:15 AM Mika Westerberg
<mika.westerberg@xxxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Mon, May 20, 2024 at 05:57:42PM +0200, Gia wrote:
> > Hi Mario,
> >
> > In my case in both cases the value for:
> >
> > $ cat /sys/bus/thunderbolt/devices/domain0/iommu_dma_protection
> >
> > is 0.
> >
> > Output of sudo journalctl -k with kernel option thunderbolt.dyndbg=+p:
> > https://codeshare.io/qAXLoj
> >
> > Output of sudo dmesg with kernel option thunderbolt.dyndbg=+p:
> > https://codeshare.io/zlPgRb
>
> I see you have "pcie_aspm=off" in the kernel command line. That kind of
> affects things. Can you drop that and see if it changes anything? And
> also provide a new full dmesg with "thunderbolt.dyndbg=+p" in the
> command line (dropping pcie_aspm_off)?
>
> Also is there any particular reason you have it there?





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux