Re: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pierre,

On 5/9/2024 5:54 AM, Pierre-Louis Bossart wrote:



Wait, is this saying you will have exactly one PCM device/FE DAI
connected to the USB BE DAI exposed in patch 11?

+    SND_SOC_DAPM_MIXER("USB Mixer", SND_SOC_NOPM, 0, 0,
+               usb_mixer_controls,
+               ARRAY_SIZE(usb_mixer_controls)),
+

And then what is the role of the USB mixer if you only have one input?

I must be missing something.


Not sure if this is a QCOM specific implementation, but the way the DT
is defined for the USB offload path is as follows:

     usb-dai-link {
         link-name = "USB Playback";

         cpu {
             sound-dai = <&q6afedai USB_RX>;
         };

         codec {
             sound-dai = <&usbdai USB_RX>;
         };

         platform {
             sound-dai = <&q6routing>;
         };
     };

Based on our DT parser helper API (qcom_snd_parse_of()) this isn't going
to create a PCM device.  The PCM devices are created for nodes that
don't have a codec and platform defined:

     mm1-dai-link {
         link-name = "MultiMedia1";
         cpu {
             sound-dai = <&q6asmdai      MSM_FRONTEND_DAI_MULTIMEDIA1>;
         };
     };

The ASM path is the entity that defines the number of PCM devices that
is created for the QC ASoC platform card, and is where the actual PCM
data is sent over to the DSP.  So there could be several PCM devices
that can use the USB BE DAI.

ok, but then how would this work with the ALSA controls reporting which
PCM device can be used? I didn't see a mechanism allowing for more than
one offloaded device, IIRC the control reported just ONE PCM device number.

With respects to the PCM devices exposed by the ASoC card, the USB Mixer controls which "Multimedia" (ASM) path can be routed to the USB BE DAI.

The kcontrols you are mentioning are controlling which USB card and USB PCM device to execute the offloading on. As of now, at least for the QCOM implementation, we support only offloading on one path/USB interface. I can't comment on how other offloading solutions look like, but we pass the USB PCM and card index as part of our AFE port open command (done from USB BE DAI). This will result in a USB QMI message back (from ADSP) to our USB SND offload driver, which carries all the information about the selected card and PCM index to execute offloading on.

One thing I can do is to actually make the kcontrols for selecting the PCM and card devices to look at the num_supported_streams. This would at least allow for vendors that have support for more potential offloading streams to select more than one.

Thanks
Wesley Cheng




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux