On Tue, May 07, 2024 at 11:57:36AM -0700, Wesley Cheng wrote:
Hi Michael, On 5/6/2024 4:06 PM, Michael Grzeschik wrote:This patch is splitting up the interrupt event handling from one interrupt thread to separate per endpoint interrupt threads.I assume that the incentive from doing this is to improve overall throughput numbers. Would you be able to share some data on the benefits of moving to per EP event management?
The main benefit is to make it possible to use high demanding usb endpoints simultaneously. In our special case we saw that streaming via uac and streaming via uvc was producing noise in the audio stream. This was due to the fact, that the isoc feedback endpoint that would adjust the samplerate was not being called fast enough when there was heavy a lot of traffic in the uvc endpoint context. By moving the endpoints into their own thread handlers the short feedback requests are at least able to be scheduled in between the bursts of the uvc packages. The next step is to have all threads running on different cpu cores, without interfering each other. However, as we still have not matrix irq allocator for arm, there still is no direct benefit from that yet.
To achieve this we create a new dwc3 interrupt domain in which we map all claimed interrupts to individual interrupt threads. Although the gadget layer is preparing the claimed parameter of each usb_ep which could be checked if the endpoint is to used or not, the claimed value was 0 for each ep in gadget_start. This was tested when describing some composite gadget using configfs.yeah... the claimed flag is cleared by the USB gadget, ie USB configfs (not sure if you're using this) whenever it adds a USB config. This is to handle multi config situations, so subsequent USB configs can be assigned (resuse) endpoints, since only one config is active at a time for a USB device.This was a struggle for me as well when adding the TXFIFO resizing logic. We won't actually know which EPs are going to be used until the host issues the set configuration packet to select a config, and the set_alt() callback issues usb_ep_enable(). So the implementation (TXFIFO resizing) is currently based on the maximum potential endpoints used by any USB configuration.Not sure if having 31 (potentially) different IRQ entries would be ok, but maybe it would be simpler to just to request IRQ for dwc->num_eps always?Have you tried this on a multi config device?
No, I didn't. I doubt that this will work after your explanation. So thanks for the insides! I tried putting the request_threaded_irq into the ep_enable function but this does not work as I see a lot of schedule while atomic errors. This is possible as ep_enable is called from an set alt coming from ep0 interrupt thread context. So there is probably now no other option left to have exact endpoint interrupt threads. I will rework this back to request a kthread for each endpoint even as we will probably would not be using them. Regards, Michael -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
