RE: [PATCH v2] usb: ohci: Prevent missed ohci interrupts

[David Laight <David.Laight@xxxxxxxxxx>]

From: Guenter Roeck
> Sent: 29 April 2024 14:34
> 
> On 4/28/24 23:49, Gerd Hoffmann wrote:
> >    Hi,
> >
> >>>> +	/* repeat until all enabled interrupts are handled */
> >>>> +	if (ohci->rh_state != OHCI_RH_HALTED) {
> >>>> +		ints = ohci_readl(ohci, &regs->intrstatus);
> >>>> +		if (ints & ohci_readl(ohci, &regs->intrenable))
> >>>
> >>> Doesn't the driver know which interrupts are enabled?
> >>> So it should be able to avoid doing two (likely) slow io reads?
> >>> (PCIe reads are pretty much guaranteed to be high latency.)
> >>
> >> No, the driver does not cache intrenable.
> >
> > Does the driver ever change intrenable after initialization?
> >
> 
> $ git grep -e intrenable -e intrdisable drivers/usb/host/*ohci*c | grep ohci_writel
> drivers/usb/host/ohci-hcd.c:	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:		ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hcd.c:	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:	ohci_writel (ohci, mask, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hcd.c:			ohci_writel (ohci, OHCI_INTR_UE, &regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:		ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
> drivers/usb/host/ohci-hcd.c:	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
> drivers/usb/host/ohci-hcd.c:		ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hub.c:	ohci_writel(ohci, OHCI_INTR_SF, &ohci->regs->intrdisable);
> drivers/usb/host/ohci-hub.c:	ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hub.c:		ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hub.c:			ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
> drivers/usb/host/ohci-hub.c:	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
> drivers/usb/host/ohci-q.c:	ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);

At least the hardware has separate enable/disable registers
so the driver isn't doing RMW cycles.

I'd guess that the normal condition is that no interrupts are pending.
So it can be held to one (slow) read by checking:
	if (ints && (ints & ohci_readl(ohci, &regs->intrenable)))
Although maybe there are some 'never enabled' interrupts that
might need masking?

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)