Hi,
Op 25-04-2024 om 23:27 schreef Ferry Toth:
Hi,
Op 17-04-2024 om 17:13 schreef Hardik Gajjar:
On Tue, Apr 16, 2024 at 04:48:32PM +0300, Andy Shevchenko wrote:
On Thu, Apr 11, 2024 at 10:52:36PM +0200, Ferry Toth wrote:
Op 11-04-2024 om 18:39 schreef Andy Shevchenko:
On Thu, Apr 11, 2024 at 04:26:37PM +0200, Hardik Gajjar wrote:
On Wed, Apr 10, 2024 at 08:37:42PM +0300, Andy Shevchenko wrote:
On Sun, Apr 07, 2024 at 10:51:51PM +0200, Ferry Toth wrote:
Op 05-04-2024 om 13:38 schreef Hardik Gajjar:
...
Exactly. And this didn't happen before the 2 patches.
To be precise: /sys/class/net/usb0 is not removed and it is a
link, the link
target
/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/net/usb0 no
longer exists
So, it means that the /sys/class/net/usb0 is present, but the
symlink is
broken. In that case, the dwc3 driver should recreate the device,
and the
symlink should become active again
Yes, on first enabling gadget (when device mode is activated):
root@yuna:~# ls
/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
driver net power sound subsystem suspended uevent
Then switching to host mode:
root@yuna:~# ls
/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
ls: cannot access
'/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/': No
such file
or directory
Then back to device mode:
root@yuna:~# ls
/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
driver power sound subsystem suspended uevent
net is missing. But, network functions:
root@yuna:~# ping 10.42.0.1
PING 10.42.0.1 (10.42.0.1): 56 data bytes
Mass storage device is created and removed each time as expected.
So, what's the conclusion? Shall we move towards revert of those two
changes?
As promised, I have the tested the this patch with the dwc3 gadget. I
could not reproduce
the issue.
I can see the usb0 exist all the time and accessible regardless of the
role switching of the USB mode (peripheral <-> host)
Following are the logs:
//Host to device
console:/sys/bus/platform/devices/a800000.ssusb # echo "peripheral" >
mode
console:/sys/bus/platform/devices/a800000.ssusb # ls
a800000.dwc3/gadget/net/
usb0
//device to host
console:/sys/bus/platform/devices/a800000.ssusb # echo "host" > mode
console:/sys/bus/platform/devices/a800000.ssusb # ls
a800000.dwc3/gadget/net/
usb0
That is weird. When I switch to host mode (using the physical switch),
the whole gadget directory is removed (now testing 6.9.0-rc5)
Switching back to device mode, that gadget directory is recreated. And
gadget/sound as well, but not gadget/net.
s
a800000.dwc3/gadget/net/usb0 <
addr_assign_type duplex phys_port_name
addr_len flags phys_switch_id
address gro_flush_timeout power
broadcast ifalias proto_down
carrier ifindex queues
carrier_changes iflink speed
carrier_down_count link_mode statistics
carrier_up_count mtu subsystem
dev_id name_assign_type tx_queue_len
dev_port netdev_group type
device operstate uevent
dormant phys_port_id waiting_for_supplier
console:/sys/bus/platform/devices/a800000.ssusb # ifconfig -a usb0
usb0 Link encap:Ethernet HWaddr 3a:8b:63:97:1a:9a
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:0
console:/sys/bus/platform/devices/a800000.ssusb #
I strongly advise against reverting the patch solely based on the
observed issue of removing the /sys/class/net/usb0 directory while the
usb0 interface remains available.
There's more to it. I also mentioned that switching the role or
unplugging the cable leaves the usb0 connection.
I have while in host mode:
root@yuna:~# ifconfig -a usb0
usb0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 10.42.0.221 netmask 255.255.255.0 broadcast 10.42.0.255
inet6 fe80::a8bb:ccff:fedd:eef1 prefixlen 64 scopeid 0x20<link>
You don't see that because you didn't create a connection at all.
Instead, I recommend enabling FTRACE to trace the functions involved
and identify which faulty call is responsible for removing usb0.
Switching from device -> host -> device:
root@yuna:~# trace-cmd record -p function_graph -l *gether_*
plugin 'function_graph'
Hit Ctrl^C to stop recording
^CCPU0 data recorded at offset=0x1c8000
188 bytes in size (4096 uncompressed)
CPU1 data recorded at offset=0x1c9000
0 bytes in size (0 uncompressed)
root@yuna:~# trace-cmd report
cpus=2
irq/68-dwc3-725 [000] 514.575337: funcgraph_entry: #
2079.480 us | gether_disconnect();
irq/68-dwc3-946 [000] 524.263731: funcgraph_entry: +
11.640 us | gether_disconnect();
irq/68-dwc3-946 [000] 524.263743: funcgraph_entry: !
116.520 us | gether_connect();
irq/68-dwc3-946 [000] 524.268029: funcgraph_entry: #
2057.260 us | gether_disconnect();
irq/68-dwc3-946 [000] 524.270089: funcgraph_entry: !
109.000 us | gether_connect();
I tried to get a more useful trace:
root@yuna:/sys/kernel/tracing# echo 'gether_*' > set_ftrace_filter
root@yuna:/sys/kernel/tracing# echo 'eem_*' >> set_ftrace_filter
root@yuna:/sys/kernel/tracing# echo function > current_tracer
root@yuna:/sys/kernel/tracing# echo 'reset_config' >> set_ftrace_filter
-> switch to host mode then back to device
root@yuna:/sys/kernel/tracing# cat trace
# tracer: function
#
# entries-in-buffer/entries-written: 53/53 #P:2
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
irq/68-dwc3-523 [000] D..3. 133.990254: reset_config
<-__composite_disconnect
irq/68-dwc3-523 [000] D..3. 133.992274: eem_disable
<-reset_config
irq/68-dwc3-523 [000] D..3. 133.992276: gether_disconnect
<-reset_config
kworker/1:3-443 [001] ...1. 134.022453: eem_unbind
<-purge_configs_funcs
-> to device mode
kworker/1:3-443 [001] ...1. 148.630773: eem_bind
<-usb_add_function
irq/68-dwc3-734 [000] D..3. 149.155209: eem_set_alt
<-composite_setup
irq/68-dwc3-734 [000] D..3. 149.155215: gether_disconnect
<-eem_set_alt
irq/68-dwc3-734 [000] D..3. 149.155220: gether_connect
<-eem_set_alt
irq/68-dwc3-734 [000] D..3. 149.157287: eem_set_alt
<-composite_setup
irq/68-dwc3-734 [000] D..3. 149.157292: gether_disconnect
<-eem_set_alt
irq/68-dwc3-734 [000] D..3. 149.159338: gether_connect
<-eem_set_alt
irq/68-dwc3-734 [000] D..2. 149.239625: eem_unwrap <-rx_complete
...
I don't know where to look exactly. Any hints?
According to current kernel architecture of u_ether driver, only
gether_cleanup should remove the usb0 interface along with its kobject
and sysfs interface.
I suggest sharing the analysis here to understand why this practice is
not followed in your use case or driver ?
Yes, I'll try to trace where that happens.
Nevertheless, the disappearance of the net/usb0 directory seems
harmless? But the usb: net device remaining after disconnect or role
switch is not good, as the route remains.
May be they are 2 separate problems. Could you try to reproduce what
happens if you make eem connection and then unplug?
I am curious why the driver was developed without adhering to the
kernel's gadget architecture.
I don't know what you mean here. Which driver do you mean?
I have the dwc3 IP base usb controller, Let me check with this
patch and
share result here. May be we need some fix in dwc3
Would have been nice if someone could test on other controller as
well. But
another instance of dwc3 is also very welcome.
It's quite possible, please test on your side.
We are happy to test any fixes if you come up with.
--
With Best Regards,
Andy Shevchenko
