Re: [PATCH v2] usb: dwc3: Wait unconditionally after issuing EndXfer command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 25, 2024, Prashanth K wrote:
> Currently all controller IP/revisions except DWC3_usb3 >= 310a
> wait 1ms unconditionally for ENDXFER completion when IOC is not
> set. This is because DWC_usb3 controller revisions >= 3.10a
> supports GUCTL2[14: Rst_actbitlater] bit which allows polling
> CMDACT bit to know whether ENDXFER command is completed.
> 
> Consider a case where an IN request was queued, and parallelly
> soft_disconnect was called (due to ffs_epfile_release). This
> eventually calls stop_active_transfer with IOC cleared, hence
> send_gadget_ep_cmd() skips waiting for CMDACT cleared during
> EndXfer. For DWC3 controllers with revisions >= 310a, we don't
> forcefully wait for 1ms either, and we proceed by unmapping the
> requests. If ENDXFER didn't complete by this time, it leads to
> SMMU faults since the controller would still be accessing those
> requests.
> 
> Fix this by ensuring ENDXFER completion by adding 1ms delay in
> __dwc3_stop_active_transfer() unconditionally.
> 
> Cc: <stable@xxxxxxxxxxxxxxx>
> Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer")
> Signed-off-by: Prashanth K <quic_prashk@xxxxxxxxxxx>
> ---
> Changes in v2:
> Changed the patch logic from CMDACT polling to 1ms mdelay.
> Updated subject and commit accordingly.
> Link to v1: https://urldefense.com/v3/__https://lore.kernel.org/all/20240422090539.3986723-1-quic_prashk@xxxxxxxxxxx/__;!!A4F2R9G_pg!fa3zoJhmfdChG32lHtAa-7bxJpxPsw2wgzQwQAq9gWG2LwWyr9WnIzm9Eol6hmiKLEOTJuqjOeTYVYZ_sNnER6p_uF4$ 
> 
>  drivers/usb/dwc3/gadget.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 4df2661f6675..666eae94524f 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1724,8 +1724,7 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
>  	dep->resource_index = 0;
>  
>  	if (!interrupt) {
> -		if (!DWC3_IP_IS(DWC3) || DWC3_VER_IS_PRIOR(DWC3, 310A))
> -			mdelay(1);
> +		mdelay(1);
>  		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
>  	} else if (!ret) {
>  		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
> -- 
> 2.25.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux