On Thu, Apr 11, 2024 at 07:49:57AM +0300, Dmitry Baryshkov wrote:
> If the PMIC-GLINK device has orientation GPIOs declared, then it will
> report connection orientation. In this case set the flag to mark
> registered ports as orientation-aware.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> drivers/usb/typec/ucsi/ucsi_glink.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
> index d279e2cf9bba..f7546bb488c3 100644
> --- a/drivers/usb/typec/ucsi/ucsi_glink.c
> +++ b/drivers/usb/typec/ucsi/ucsi_glink.c
> @@ -186,6 +186,17 @@ static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
> return ret;
> }
>
> +static void pmic_glink_ucsi_update_connector(struct ucsi_connector *con)
> +{
> + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi);
> + int i;
> +
> + for (i = 0; i < PMIC_GLINK_MAX_PORTS; i++) {
> + if (ucsi->port_orientation[i])
> + con->typec_cap.orientation_aware = true;
> + }
> +}
> +
> static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con)
> {
> struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi);
> @@ -208,6 +219,7 @@ static const struct ucsi_operations pmic_glink_ucsi_ops = {
> .read = pmic_glink_ucsi_read,
> .sync_write = pmic_glink_ucsi_sync_write,
> .async_write = pmic_glink_ucsi_async_write,
> + .update_connector = pmic_glink_ucsi_update_connector,
> .connector_status = pmic_glink_ucsi_connector_status,
> };
>
>
> --
> 2.39.2
--
heikki
