Hi,
with the following device:
Bus 002 Device 002: ID fb5d:0001 BHYVE HID Tablet
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0xfb5d
idProduct 0x0001
bcdDevice 0.00
iManufacturer 1 BHYVE
iProduct 2 HID Tablet
iSerial 3 01
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0028
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 HID Tablet Device
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 10.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 74
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
bMaxBurst 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000f
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x0000
(Bus Powered)
we are getting a regression on enumeration. It used to work with the
code prior to your patch. Takashi is proposing the attached fixed.
It looks like we are a bit too restrictive and should just try.
Regards
OliverFrom: Takashi Iwai <tiwai@xxxxxxx>
Subject: [PATCH] USB: hub: Workaround for buggy max packet size with super
speed
Patch-mainline: Not yet, testing
References: bsc#1220569
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
drivers/usb/core/hub.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e38a4124f610..64193effc456 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4830,7 +4830,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
const char *driver_name;
bool do_new_scheme;
const bool initial = !dev_descr;
- int maxp0;
+ int maxp0, ep0_maxp;
struct usb_device_descriptor *buf, *descr;
buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
@@ -5070,7 +5070,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
else
i = 0; /* Invalid */
}
- if (usb_endpoint_maxp(&udev->ep0.desc) == i) {
+ ep0_maxp = usb_endpoint_maxp(&udev->ep0.desc);
+ if (ep0_maxp == i) {
; /* Initial ep0 maxpacket guess is right */
} else if ((udev->speed == USB_SPEED_FULL ||
udev->speed == USB_SPEED_HIGH) &&
@@ -5082,9 +5083,15 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
usb_ep0_reinit(udev);
+ } else if (udev->speed >= USB_SPEED_SUPER && initial) {
+ /* FIXME: should be more restrictive? */
+ /* Initial guess is wrong; use the descriptor's value */
+ dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+ usb_ep0_reinit(udev);
} else {
/* Initial guess is wrong and descriptor's value is invalid */
- dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", maxp0);
+ dev_err(&udev->dev, "Invalid ep0 maxpacket: %d, expected %d\n", maxp0, ep0_maxp);
retval = -EMSGSIZE;
goto fail;
}
--
2.35.3
