On Mon, Apr 08, 2024, Krishna Kurapati wrote:
> DWC3 Qcom wrapper currently supports only wakeup configuration
> for single port controllers. Read speed of each port connected
> to the controller and enable wakeup for each of them accordingly.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++---------------
> 1 file changed, 41 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 35eb338514bc..12182e0f8f45 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -57,6 +57,7 @@ struct dwc3_qcom_port {
> int dp_hs_phy_irq;
> int dm_hs_phy_irq;
> int ss_phy_irq;
> + enum usb_device_speed usb2_speed;
> };
>
> struct dwc3_qcom {
> @@ -68,7 +69,6 @@ struct dwc3_qcom {
> struct reset_control *resets;
> struct dwc3_qcom_port ports[DWC3_MAX_PORTS];
> u8 num_ports;
> - enum usb_device_speed usb2_speed;
>
> struct extcon_dev *edev;
> struct extcon_dev *host_edev;
> @@ -307,7 +307,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
> return dwc->xhci;
> }
>
> -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
> {
> struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> struct usb_device *udev;
> @@ -318,14 +318,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> */
> hcd = platform_get_drvdata(dwc->xhci);
>
> - /*
> - * It is possible to query the speed of all children of
> - * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> - * currently supports only 1 port per controller. So
> - * this is sufficient.
> - */
> #ifdef CONFIG_USB
> - udev = usb_hub_find_child(hcd->self.root_hub, 1);
> + udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
> #else
> udev = NULL;
> #endif
> @@ -356,26 +350,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
> disable_irq_nosync(irq);
> }
>
> -static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> +static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
> {
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
>
> - if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> - (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> + if (port->usb2_speed == USB_SPEED_LOW) {
> + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
> + } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
> + (port->usb2_speed == USB_SPEED_FULL)) {
> + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
> } else {
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
> }
>
> - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
> }
>
> -static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> +static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
> {
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
>
> /*
> * Configure DP/DM line interrupts based on the USB2 device attached to
> @@ -386,21 +380,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
> */
>
> - if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> + if (port->usb2_speed == USB_SPEED_LOW) {
> + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
> IRQ_TYPE_EDGE_FALLING);
> - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> - (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> + } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
> + (port->usb2_speed == USB_SPEED_FULL)) {
> + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
> IRQ_TYPE_EDGE_FALLING);
> } else {
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
> IRQ_TYPE_EDGE_RISING);
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
> IRQ_TYPE_EDGE_RISING);
> }
>
> - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0);
> +}
> +
> +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> +{
> + int i;
> +
> + for (i = 0; i < qcom->num_ports; i++)
> + dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
> +}
> +
> +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> +{
> + int i;
> +
> + for (i = 0; i < qcom->num_ports; i++)
> + dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
> }
>
> static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -427,7 +437,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> * freezable workqueue.
> */
> if (dwc3_qcom_is_host(qcom) && wakeup) {
> - qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
> + for (i = 0; i < qcom->num_ports; i++)
> + qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
> dwc3_qcom_enable_interrupts(qcom);
> }
>
> --
> 2.34.1
>
Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
Thanks,
Thinh
