The UCSI 1.0 is not orientation aware. Only UCSI 2.0 has added
orientation status to GET_CONNECTOR_STATUS data. However the glue code
can be able to detect cable orientation on its own (and report it via
corresponding typec API). Add a flag to let UCSI mark registered ports
as orientation aware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 2 ++
drivers/usb/typec/ucsi/ucsi.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 7ad544c968e4..6f5adc335980 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1551,6 +1551,8 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
cap->svdm_version = SVDM_VER_2_0;
cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
+ cap->orientation_aware = !!(ucsi->quirks & UCSI_ORIENTATION_AWARE);
+
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY)
*accessory++ = TYPEC_ACCESSORY_AUDIO;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY)
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 6599fbd09bee..e92be45e4c1c 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -410,6 +410,7 @@ struct ucsi {
unsigned long quirks;
#define UCSI_NO_PARTNER_PDOS BIT(0) /* Don't read partner's PDOs */
#define UCSI_DELAY_DEVICE_PDOS BIT(1) /* Reading PDOs fails until the parter is in PD mode */
+#define UCSI_ORIENTATION_AWARE BIT(2) /* UCSI is orientation aware */
};
#define UCSI_MAX_SVID 5
--
2.39.2
