>
> On Thu, Mar 21, 2024 at 04:14:31PM +0800, Xu Yang wrote:
> > Enable 2 USB nodes and add 2 PTN5150 nodes on i.MX8ULP evk board.
> >
> > Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> >
> > ---
> > Changes in v2:
> > - fix format as suggusted by Fabio
> > - add PTN5150 nodes
> > Changes in v3:
> > - no changes
> > Changes in v4:
> > - no changes
> > Changes in v5:
> > - no changes
> > Changes in v6:
> > - no changes
> > Changes in v7:
> > - no changes
> > Changes in v8:
> > - no changes
> > Changes in v9:
> > - no changes
> > Changes in v10:
> > - no changes
> > ---
> > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 84 +++++++++++++++++++
> > 1 file changed, 84 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> > index 69dd8e31027c..bf418af31039 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> > @@ -133,6 +133,64 @@ pcal6408: gpio@21 {
> > gpio-controller;
> > #gpio-cells = <2>;
> > };
> > +
> > + ptn5150_1: typec@1d {
>
> Could you sort devices in unit-address?
Okay.
>
> > + compatible = "nxp,ptn5150";
> > + reg = <0x1d>;
> > + int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_typec1>;
> > + status = "disabled";
> > + };
> > +
> > + ptn5150_2: typec@3d {
> > + compatible = "nxp,ptn5150";
> > + reg = <0x3d>;
> > + int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
> > + pinctrl-names = "default";
>
> Broken indent?
Yes, will fix it.
Thanks,
Xu Yang
>
> Shawn
>
> > + pinctrl-0 = <&pinctrl_typec2>;
> > + status = "disabled";
> > + };
> > +};
> > +
> > +&usbotg1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb1>;
> > + dr_mode = "otg";
> > + hnp-disable;
> > + srp-disable;
> > + adp-disable;
> > + over-current-active-low;
> > + status = "okay";
> > +};
> > +
> > +&usbphy1 {
> > + fsl,tx-d-cal = <110>;
> > + status = "okay";
> > +};
> > +
> > +&usbmisc1 {
> > + status = "okay";
> > +};
> > +
> > +&usbotg2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2>;
> > + dr_mode = "otg";
> > + hnp-disable;
> > + srp-disable;
> > + adp-disable;
> > + over-current-active-low;
> > + status = "okay";
> > +};
> > +
> > +&usbphy2 {
> > + fsl,tx-d-cal = <110>;
> > + status = "okay";
> > +};
> > +
> > +&usbmisc2 {
> > + status = "okay";
> > };
> >
> > &usdhc0 {
> > @@ -224,6 +282,32 @@ MX8ULP_PAD_PTE13__LPI2C7_SDA 0x20
> > >;
> > };
> >
> > + pinctrl_typec1: typec1grp {
> > + fsl,pins = <
> > + MX8ULP_PAD_PTF3__PTF3 0x3
> > + >;
> > + };
> > +
> > + pinctrl_typec2: typec2grp {
> > + fsl,pins = <
> > + MX8ULP_PAD_PTF5__PTF5 0x3
> > + >;
> > + };
> > +
> > + pinctrl_usb1: usb1grp {
> > + fsl,pins = <
> > + MX8ULP_PAD_PTF2__USB0_ID 0x10003
> > + MX8ULP_PAD_PTF4__USB0_OC 0x10003
> > + >;
> > + };
> > +
> > + pinctrl_usb2: usb2grp {
> > + fsl,pins = <
> > + MX8ULP_PAD_PTD23__USB1_ID 0x10003
> > + MX8ULP_PAD_PTF6__USB1_OC 0x10003
> > + >;
> > + };
> > +
> > pinctrl_usdhc0: usdhc0grp {
> > fsl,pins = <
> > MX8ULP_PAD_PTD1__SDHC0_CMD 0x3
> > --
> > 2.34.1
> >
