UCSI driver will attempt to set a USB PD device only if it was able to
read PDOs from the firmware. This results in suboptimal behaviour, since
the PD device will be created anyway. Move calls to
typec_port_set_usb_power_delivery() out of conditional code and call it
after reading capabilities.
Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 7666142d8bbb..d1a45ce7f660 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1569,7 +1569,6 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
}
con->port_source_caps = pd_cap;
- typec_port_set_usb_power_delivery(con->port, con->pd);
}
memset(&pd_caps, 0, sizeof(pd_caps));
@@ -1586,9 +1585,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
}
con->port_sink_caps = pd_cap;
- typec_port_set_usb_power_delivery(con->port, con->pd);
}
+ typec_port_set_usb_power_delivery(con->port, con->pd);
+
/* Alternate modes */
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
if (ret) {
--
2.39.2
