... and use clk framework functions only.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/usb/musb/musb_core.c | 12 +++---------
drivers/usb/musb/musb_core.h | 2 --
drivers/usb/musb/omap2430.c | 10 ++--------
drivers/usb/musb/tusb6010.c | 16 ++++++----------
4 files changed, 11 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c65cf4..f5fadf7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1907,7 +1907,6 @@ bad_config:
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
- musb->set_clock = plat->set_clock;
musb->min_power = plat->min_power;
/* Clock usage is chip-specific ... functional clock (DaVinci,
@@ -2159,11 +2158,9 @@ static int musb_suspend(struct device *dev)
*/
}
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
+ clk_disable(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
+
return 0;
}
@@ -2175,10 +2172,7 @@ static int musb_resume_noirq(struct device *dev)
if (!musb->clock)
return 0;
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
+ clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
* unless for some reason the whole soc powered down or the USB
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2ac0e6f..4a43a32 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -394,8 +394,6 @@ struct musb {
u8 board_mode; /* enum musb_mode */
int (*board_set_power)(int state);
- int (*set_clock)(struct clk *clk, int is_active);
-
u8 min_power; /* vbus for periph, in mA/2 */
bool is_host;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 83beeac..b8e2451 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -273,10 +273,7 @@ int musb_platform_suspend(struct musb *musb)
otg_set_suspend(musb->xceiv, 1);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
+ clk_disable(musb->clock);
return 0;
}
@@ -290,10 +287,7 @@ static int musb_platform_resume(struct musb *musb)
otg_set_suspend(musb->xceiv, 0);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
+ clk_enable(musb->clock);
l = omap_readl(OTG_SYSCONFIG);
l &= ~ENABLEWAKEUP; /* disable wakeup */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 88b587c..67ba2b9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -279,12 +279,10 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
* Keep clock active when enabled. Note that this is not tied to
* drawing VBUS, as with OTG mA can be less than musb->min_power.
*/
- if (musb->set_clock) {
- if (mA)
- musb->set_clock(musb->clock, 1);
- else
- musb->set_clock(musb->clock, 0);
- }
+ if (mA)
+ clk_enable(musb->clock);
+ else
+ clk_disable(musb->clock);
/* tps65030 seems to consume max 100mA, with maybe 60mA available
* (measured on one board) for things other than tps and tusb.
@@ -531,8 +529,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
+ clk_enable(musb->clock);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -571,8 +568,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
devctl &= ~MUSB_DEVCTL_SESSION;
conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
+ clk_disable(musb->clock);
}
prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
--
1.6.6.rc0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
