Use resource_size().
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 4e970cf..976822f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1914,14 +1914,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
udc->vbus_pin = -ENODEV;
ret = -ENOMEM;
- udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ udc->regs = ioremap(regs->start, resource_size(regs));
if (!udc->regs) {
dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
goto err_map_regs;
}
dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
(unsigned long)regs->start, udc->regs);
- udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+ udc->fifo = ioremap(fifo->start, resource_size(fifo));
if (!udc->fifo) {
dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
goto err_map_fifo;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
