Hi All,
On 3/19/2024 7:05 PM, Udipto Goswami wrote:
Update SNPS Phy tuning parameters for sm8450 QRD platform to fix
electrical compliance failures.
Signed-off-by: Udipto Goswami <quic_ugoswami@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index c7d05945aa51..7b62ead68e77 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -467,6 +467,14 @@
vdda-pll-supply = <&vreg_l5b_0p88>;
vdda18-supply = <&vreg_l1c_1p8>;
vdda33-supply = <&vreg_l2b_3p07>;
+ qcom,squelch-detector-bp = <(-2090)>;
+ qcom,hs-disconnect-bp = <1743>;
+ qcom,pre-emphasis-amplitude-bp = <40000>;
+ qcom,pre-emphasis-duration-bp = <20000>;
+ qcom,hs-amplitude-bp = <2000>;
+ qcom,hs-output-impedance-micro-ohms = <2600000>;
+ qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+ qcom,hs-rise-fall-time-bp = <(-4100)>;
};
&usb_1_qmpphy {
sender and cc list is wrong, please ignore this.
Will send it to the right recipients.
Thanks,
-Udipto
