The completion notification for the final SET_NOTIFICATION_ENABLE
command during initialization can include a connector change
notification. However, at the time this completion notification is
processed, the ucsi struct is not ready to handle this notification.
As a result the notification is ignored and the controller
never sends an interrupt again.
Re-check CCI for a pending connector state change after
initialization is complete. Adjust the corresponding debug
message accordingly.
Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Christian A. Ehrhardt <lk@xxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 8a6645ffd938..dceeed207569 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1237,7 +1237,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num)
struct ucsi_connector *con = &ucsi->connector[num - 1];
if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) {
- dev_dbg(ucsi->dev, "Bogus connector change event\n");
+ dev_dbg(ucsi->dev, "Early connector change event\n");
return;
}
@@ -1636,6 +1636,7 @@ static int ucsi_init(struct ucsi *ucsi)
{
struct ucsi_connector *con, *connector;
u64 command, ntfy;
+ u32 cci;
int ret;
int i;
@@ -1688,6 +1689,13 @@ static int ucsi_init(struct ucsi *ucsi)
ucsi->connector = connector;
ucsi->ntfy = ntfy;
+
+ ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci));
+ if (ret)
+ return ret;
+ if (UCSI_CCI_CONNECTOR(READ_ONCE(cci)))
+ ucsi_connector_change(ucsi, cci);
+
return 0;
err_unregister:
--
2.40.1
