On Wed, Feb 14, 2024, Roger Quadros wrote: > As runtime PM is enabled, the module can be runtime > suspended when .remove() is called. > > Do a pm_runtime_get_sync() to make sure module is active > before doing any register operations. > > Doing a pm_runtime_put_sync() should disable the refclk > so no need to disable it again. > > Fixes the below warning at module removel. > > [ 39.705310] ------------[ cut here ]------------ > [ 39.710004] clk:162:3 already disabled > [ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8 > Actually, it will be better to have a fixes tag and separate this from this series series. You can retain my Acked-by if you resend it with the Fixes tag and Cc stable. BR, Thinh > Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> > --- > Changelog: > > v3: no change > > v2: no change > https://urldefense.com/v3/__https://lore.kernel.org/all/20240205141221.56076-3-rogerq@xxxxxxxxxx/__;!!A4F2R9G_pg!b7_3vmJpNLOFy3g_wExMQSAzi949O4PoID3e4rNEvAsbgCvxxkj0DiSDFJxF7857DZM7qy9DMkH6Q5BPD-jX$ > > v1: https://urldefense.com/v3/__https://lore.kernel.org/all/20240201121220.5523-3-rogerq@xxxxxxxxxx/__;!!A4F2R9G_pg!b7_3vmJpNLOFy3g_wExMQSAzi949O4PoID3e4rNEvAsbgCvxxkj0DiSDFJxF7857DZM7qy9DMkH6Q1CciylE$ > --- > drivers/usb/dwc3/dwc3-am62.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c > index 1bfc9e67614f..600ba9cfefea 100644 > --- a/drivers/usb/dwc3/dwc3-am62.c > +++ b/drivers/usb/dwc3/dwc3-am62.c > @@ -273,6 +273,11 @@ static void dwc3_ti_remove(struct platform_device *pdev) > struct dwc3_am62 *am62 = platform_get_drvdata(pdev); > u32 reg; > > + pm_runtime_get_sync(dev); > + > + device_wakeup_disable(dev); > + device_set_wakeup_capable(dev, false); > + > of_platform_depopulate(dev); > > /* Clear mode valid bit */ > @@ -281,7 +286,6 @@ static void dwc3_ti_remove(struct platform_device *pdev) > dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); > > pm_runtime_put_sync(dev); > - clk_disable_unprepare(am62->usb2_refclk); > pm_runtime_disable(dev); > pm_runtime_set_suspended(dev); > } > > -- > 2.34.1 >
