[PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unused USB ports may have bogus location data in ACPI PLD tables.
This causes port peering failures as these unused USB2 and USB3 ports
location may match.

This is seen on DELL systems where all unused ports return zeroed
location data.

Don't try to peer or match ports that have connect type set to
USB_PORT_NOT_USED.

Tested-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/core/port.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index c628c1abc907..4d63496f98b6 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -573,7 +573,7 @@ static int match_location(struct usb_device *peer_hdev, void *p)
 	struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev);
 	struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent);
 
-	if (!peer_hub)
+	if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED)
 		return 0;
 
 	hcd = bus_to_hcd(hdev->bus);
@@ -584,7 +584,8 @@ static int match_location(struct usb_device *peer_hdev, void *p)
 
 	for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) {
 		peer = peer_hub->ports[port1 - 1];
-		if (peer && peer->location == port_dev->location) {
+		if (peer && peer->connect_type != USB_PORT_NOT_USED &&
+		    peer->location == port_dev->location) {
 			link_peers_report(port_dev, peer);
 			return 1; /* done */
 		}
-- 
2.25.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux