From: David Vrabel <david.vrabel@xxxxxxx>
The WHCI HCD will also support urbs with scatter-gather lists. Add a
usb_bus field to indicated how many sg list elements are supported by
the HCD. Use this to decide whether to pass the scatter-list to the HCD
or not.
Make the usb-storage driver use this new field.
Signed-off-by: David Vrabel <david.vrabel@xxxxxxx>
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Cc: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/core/message.c | 8 +-------
drivers/usb/host/xhci-pci.c | 2 ++
drivers/usb/storage/usb.c | 10 ++++++++++
include/linux/usb.h | 1 +
4 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e80f1af..8d874ca 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -393,13 +393,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
if (io->entries <= 0)
return io->entries;
- /* If we're running on an xHCI host controller, queue the whole scatter
- * gather list with one call to urb_enqueue(). This is only for bulk,
- * as that endpoint type does not care how the data gets broken up
- * across frames.
- */
- if (usb_pipebulk(pipe) &&
- bus_to_hcd(dev->bus)->driver->flags & HCD_USB3) {
+ if (dev->bus->sg_tablesize > 0) {
io->urbs = kmalloc(sizeof *io->urbs, mem_flags);
use_sg = true;
} else {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 06595ec..e097008 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -54,6 +54,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
+ hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 1;
+
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 01e43a1..1599d86 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -843,6 +843,15 @@ static int usb_stor_scan_thread(void * __us)
complete_and_exit(&us->scanning_done, 0);
}
+static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+
+ if (usb_dev->bus->sg_tablesize) {
+ return usb_dev->bus->sg_tablesize;
+ }
+ return SG_ALL;
+}
/* First part of general USB mass-storage probing */
int usb_stor_probe1(struct us_data **pus,
@@ -871,6 +880,7 @@ int usb_stor_probe1(struct us_data **pus,
* Allow 16-byte CDBs and thus > 2TB
*/
host->max_cmd_len = 16;
+ host->sg_tablesize = usb_stor_sg_tablesize(intf);
*pus = us = host_to_us(host);
memset(us, 0, sizeof(struct us_data));
mutex_init(&(us->dev_mutex));
diff --git a/include/linux/usb.h b/include/linux/usb.h
index a34fa89..6e91ee4 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -331,6 +331,7 @@ struct usb_bus {
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
+ unsigned sg_tablesize; /* 0 or largest number of sg list entries */
int devnum_next; /* Next open device number in
* round-robin allocation */
--
1.6.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
