https://bugzilla.kernel.org/show_bug.cgi?id=216728 Rustam Abdullaev (rustamabd@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |rustamabd@xxxxxxxxx --- Comment #45 from Rustam Abdullaev (rustamabd@xxxxxxxxx) --- So, on my system, Lenovo X1 Extreme Gen 5, the commit e8b908146d44310473e43b3382eca126e12d279c does not fix the disappearing Thunderbolt issue and instead adds a 65-second delay when resuming from sleep. Could it be that such a wait is too long? After upgrading to 6.4.1+ the wait after each resume is excruciating. And can anything be done to fix the Thunderbolt issue on my system? [ 49.135899] pcieport 0000:21:02.0: Unable to change power state from D3cold to D0, device inaccessible [ 51.415400] xhci_hcd 0000:56:00.0: not ready 1023ms after resume; waiting [ 51.415407] thunderbolt 0000:22:00.0: not ready 1023ms after resume; waiting [ 52.471401] xhci_hcd 0000:56:00.0: not ready 2047ms after resume; waiting [ 52.471406] thunderbolt 0000:22:00.0: not ready 2047ms after resume; waiting [ 54.743394] xhci_hcd 0000:56:00.0: not ready 4095ms after resume; waiting [ 54.743399] thunderbolt 0000:22:00.0: not ready 4095ms after resume; waiting [ 59.095398] xhci_hcd 0000:56:00.0: not ready 8191ms after resume; waiting [ 59.095403] thunderbolt 0000:22:00.0: not ready 8191ms after resume; waiting [ 67.543405] xhci_hcd 0000:56:00.0: not ready 16383ms after resume; waiting [ 67.543410] thunderbolt 0000:22:00.0: not ready 16383ms after resume; waiting [ 85.207405] xhci_hcd 0000:56:00.0: not ready 32767ms after resume; waiting [ 85.207409] thunderbolt 0000:22:00.0: not ready 32767ms after resume; waiting [ 120.023396] xhci_hcd 0000:56:00.0: not ready 65535ms after resume; giving up [ 120.023401] thunderbolt 0000:22:00.0: not ready 65535ms after resume; giving up [ 120.023570] xhci_hcd 0000:56:00.0: Unable to change power state from D3cold to D0, device inaccessible [ 120.023628] thunderbolt 0000:22:00.0: Unable to change power state from D3cold to D0, device inaccessible [ 120.092723] ACPI: EC: event unblocked [ 120.094771] pcieport 0000:00:1d.0: pciehp: Slot(8): Card not present [ 120.095141] xhci_hcd 0000:56:00.0: Unable to change power state from D3cold to D0, device inaccessible [ 120.095163] xhci_hcd 0000:56:00.0: Controller not ready at resume -19 [ 120.095166] xhci_hcd 0000:56:00.0: PCI post-resume error -19! [ 120.095167] xhci_hcd 0000:56:00.0: HC died; cleaning up [ 120.095175] xhci_hcd 0000:56:00.0: PM: dpm_run_callback(): pci_pm_resume+0x0/0x110 returns -19 [ 120.095200] xhci_hcd 0000:56:00.0: PM: failed to resume async: error -19 [ 120.110113] xhci_hcd 0000:56:00.0: remove, state 4 [ 120.110120] usb usb3: USB disconnect, device number 1 -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
