On Mon, Feb 12, 2024 at 01:01:30PM +0100, Konrad Dybcio wrote: > Currently, the driver will happily register the switch/mux devices, and > so long as the i2c master doesn't complain, the user would never know > there's something wrong. > > Add a device id check (based on [1]) and return -ENODEV if the read > fails or returns nonsense. > > Checking the value on a Qualcomm SM6115P-based Lenovo Tab P11 tablet, > the ID mentioned in the datasheet does indeed show up: > fsa4480 1-0042: Found FSA4480 v1.1 (Vendor ID = 0) > > [1] https://www.onsemi.com/pdf/datasheet/fsa4480-d.pdf > > Fixes: 1dc246320c6b ("usb: typec: mux: Add On Semi fsa4480 driver") > Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> > --- > drivers/usb/typec/mux/fsa4480.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - You have marked a patch with a "Fixes:" tag for a commit that is in an older released kernel, yet you do not have a cc: stable line in the signed-off-by area at all, which means that the patch will not be applied to any older kernel releases. To properly fix this, please follow the documented rules in the Documentation/process/stable-kernel-rules.rst file for how to resolve this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
