Update the USB serial option driver to support MeiG Smart SLM320.
ID 2dee:4d41 UNISOC UNISOC-8910
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d41 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Tested successfully a PPP LTE connection using If#= 0.
Not sure of the purpose of every other serial interfaces.
Signed-off-by: Aurélien Jacobs <aurel@xxxxxxxxxx>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 72390dbf0769..b5468f51e0f8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -613,6 +613,11 @@ static void option_instat_callback(struct urb
*urb);
/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID
*/
#define LUAT_PRODUCT_AIR720U 0x4e00
+/* MeiG Smart Technology products */
+#define MEIGSMART_VENDOR_ID 0x2dee
+/* MeiG Smart SLM320 based on UNISOC UIS8910 */
+#define MEIGSMART_PRODUCT_SLM320 0x4d41
+
/* Device flags */
/* Highest interface number which can be used with NCTRL() and RSVD()
*/
@@ -2281,6 +2286,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID,
SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID,
TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID,
LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID,
MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
--
2.43.0
