Re: [PATCH] usb: gadget: u_ether: Re-attach netif device to mirror detachment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Op 18-12-2023 om 17:45 schreef Richard Acayan:
In 6.7-rc1, there was a netif_device_detach call added to the
gether_disconnect function. This clears the __LINK_STATE_PRESENT bit of
the netif device and suppresses pings (ICMP messages) and TCP connection
requests from the connected host. If userspace temporarily disconnects
the gadget, such as by temporarily removing configuration in the gadget
configfs interface, network activity should continue to be processed
when the gadget is re-connected. Mirror the netif_device_detach call
with a netif_device_attach call in gether_connect to fix re-connecting
gadgets.

Link: https://gitlab.com/postmarketOS/pmaports/-/tree/6002e51b7090aeeb42947e0ca7ec22278d7227d0/main/postmarketos-base-ui/rootfs-usr-lib-NetworkManager-dispatcher.d-50-tethering.sh
Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach")
Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
---
  drivers/usb/gadget/function/u_ether.c | 2 ++
  1 file changed, 2 insertions(+)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 9d1c40c152d8..3c5a6f6ac341 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -1163,6 +1163,8 @@ struct net_device *gether_connect(struct gether *link)
  		if (netif_running(dev->net))
  			eth_start(dev, GFP_ATOMIC);
+ netif_device_attach(dev->net);
+
  	/* on error, disable any endpoints  */
  	} else {
  		(void) usb_ep_disable(link->out_ep);
This works mrfld (Intel Edison Arduino) using configfs with v6.7.0. Tested using `iperf3 -s` on mrfld,
iperf3 --bidir -c edison-usb
[ ID][Role] Interval           Transfer     Bitrate         Retr
[ 5][TX-C] 0.00-10.00 sec 130 MBytes 109 Mbits/sec 0 sender [ 5][TX-C] 0.00-9.99 sec 129 MBytes 108 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 167 MBytes 140 Mbits/sec 0 sender [ 7][RX-C] 0.00-9.99 sec 166 MBytes 139 Mbits/sec receiver

and
iperf3 -c edison-usb
[  5]   0.00-10.00  sec   247 MBytes   207 Mbits/sec    0             sender
[ 5] 0.00-9.99 sec 246 MBytes 206 Mbits/sec receiver


Tested-by: Ferry Toth <fntoth@xxxxxxxxx> [mrfld]




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux