... and use clk framework functions only. Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> --- drivers/usb/musb/musb_core.c | 12 +++--------- drivers/usb/musb/musb_core.h | 2 -- drivers/usb/musb/omap2430.c | 10 ++-------- drivers/usb/musb/tusb6010.c | 16 ++++++---------- 4 files changed, 11 insertions(+), 29 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c65cf4..f5fadf7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1907,7 +1907,6 @@ bad_config: spin_lock_init(&musb->lock); musb->board_mode = plat->mode; musb->board_set_power = plat->set_power; - musb->set_clock = plat->set_clock; musb->min_power = plat->min_power; /* Clock usage is chip-specific ... functional clock (DaVinci, @@ -2159,11 +2158,9 @@ static int musb_suspend(struct device *dev) */ } - if (musb->set_clock) - musb->set_clock(musb->clock, 0); - else - clk_disable(musb->clock); + clk_disable(musb->clock); spin_unlock_irqrestore(&musb->lock, flags); + return 0; } @@ -2175,10 +2172,7 @@ static int musb_resume_noirq(struct device *dev) if (!musb->clock) return 0; - if (musb->set_clock) - musb->set_clock(musb->clock, 1); - else - clk_enable(musb->clock); + clk_enable(musb->clock); /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 2ac0e6f..4a43a32 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -394,8 +394,6 @@ struct musb { u8 board_mode; /* enum musb_mode */ int (*board_set_power)(int state); - int (*set_clock)(struct clk *clk, int is_active); - u8 min_power; /* vbus for periph, in mA/2 */ bool is_host; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 62fefb9..54afbc2 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -273,10 +273,7 @@ int musb_platform_suspend(struct musb *musb) otg_set_suspend(musb->xceiv, 1); - if (musb->set_clock) - musb->set_clock(musb->clock, 0); - else - clk_disable(musb->clock); + clk_disable(musb->clock); return 0; } @@ -290,10 +287,7 @@ static int musb_platform_resume(struct musb *musb) otg_set_suspend(musb->xceiv, 0); - if (musb->set_clock) - musb->set_clock(musb->clock, 1); - else - clk_enable(musb->clock); + clk_enable(musb->clock); l = omap_readl(OTG_SYSCONFIG); l &= ~ENABLEWAKEUP; /* disable wakeup */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 88b587c..67ba2b9 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -279,12 +279,10 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA) * Keep clock active when enabled. Note that this is not tied to * drawing VBUS, as with OTG mA can be less than musb->min_power. */ - if (musb->set_clock) { - if (mA) - musb->set_clock(musb->clock, 1); - else - musb->set_clock(musb->clock, 0); - } + if (mA) + clk_enable(musb->clock); + else + clk_disable(musb->clock); /* tps65030 seems to consume max 100mA, with maybe 60mA available * (measured on one board) for things other than tps and tusb. @@ -531,8 +529,7 @@ static void tusb_source_power(struct musb *musb, int is_on) devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (is_on) { - if (musb->set_clock) - musb->set_clock(musb->clock, 1); + clk_enable(musb->clock); timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE); musb->xceiv->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -571,8 +568,7 @@ static void tusb_source_power(struct musb *musb, int is_on) devctl &= ~MUSB_DEVCTL_SESSION; conf &= ~TUSB_DEV_CONF_USB_HOST_MODE; - if (musb->set_clock) - musb->set_clock(musb->clock, 0); + clk_disable(musb->clock); } prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN); -- 1.6.6.rc0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html