Hello, My name is Dennis, I'm a student from Russia, just started develop on Linux. I'm not shure, that it's ok to post my question here, but I'll try. I use 2.4.21 kernel and have the next problem: when I connect my 1 Tb usb hard-drive (Western Digital) the process stopps in message "SCSI emulation for USB Mass Storage devices". Then bus is reset by scsiglue.c. I've tried the same hard drive on 2.6 kernel, and it worked good, but I can't use that kernel. So, may be someone could advise me, what code in 2.4 kernel I can correct so, that my hard disk would work with this kernel good? /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=ff020000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1058 ProdID=1003 Rev= 1.75 S: Manufacturer=Western Digital S: Product=External HDD S: SerialNumber=57442D574341553443323930343937 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms in proc/scsi there isfolder for this device (for example usb-storage-0) and there is file in this folder, but it's empty. If somebody would tell me, where is the problem and how can I fix it, i would be very thankful. Best regards, Dennis V. Grafov -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
