Re: [PATCH v2 0/2] usb: typec: ucsi: add workaround for several Qualcomm platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@xxxxxxxxxx> wrote:
>
> On Fri, Dec 08, 2023 at 12:58:29PM +0200, Dmitry Baryshkov wrote:
> > On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@xxxxxxxxxx> wrote:
> > >
> > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote:
> > > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy.
> > > > Submitting UCSI_GET_PDOS command for partners which do not actually
> > > > support PD and do not have PDOs causes firmware to crash, preventing
> > > > further UCSI activity. Firmware on newer platforms have fixed this
> > > > issue. In order to still be able to use UCSI functionality on the
> > > > mentioned platforms (e.g. to be able to handle USB role switching),
> > > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for
> > > > the USB-C partner.
> > > >
> > > > This has been tested on sm8350 only, but should apply to other
> > > > platforms. I did not enable UCSI for sc8180x yet, it has slightly
> > > > different implementation, which I'd like to get tested first.
> > >
> > > Has no one tested this on sc8280xp/x13s before merging?
> > >
> > > I see a bunch of errors with this series applied to 6.7-rc4:
> > >
> > > [   11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
> > > [   12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110)
> > > [   17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
> > > [   17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110)
> > > [   23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
> > > [   23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110)
> >
> > Can you please post previous messages or is the first timeout the
> > first error from ucsi?
>
> These are all the ucsi messages in the log (dmesg | grep ucsi).
>
> The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead:

Ack, thank you. This is pending on my side together with the UCSI
glink / altmode rework. I hope to have patches for that closer to the
NY.

>
> [    9.012421] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-95)
> [   14.047379] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
> [   14.050708] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110)
> [   20.192382] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response
> [   20.192542] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110)
>
> I see that one if I boot with only the charger connected, the later -110
> timeouts go away if I disconnect my r8152 ethernet adapter.
>
> Johan



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux